You have no items in your shopping cart.
JHM Aluminum Lightweight Flywheel (B8 S4-S5 clutch kits ONLY) for B8 A4-A5 2.0T-3.2L FSI
SKU:
JHM-B8A4520TLWFW
$1,599.95
Featured Products
Related
-
JHM R Series Lightweight Flywheel (Chrome-Moly Forged) and Clutch Combo for B7-RS4Add to Cart | WishlistSelect options & add to cart to view final price
From: $1,644.95To: $1,774.95
-
JHM Supercharger Kit for B8-S5 w/ 4.2L FSI V8, Stage 1Add to Cart | WishlistSelect options & add to cart to view final price
From: $7,199.95To: $8,344.95
-
-
Details
Details
Introducing the JHM Lightweight Flywheel for B8 A4-A5 w/ 2.0T or 3.2L FSI!
IMPORANT! This flywheel ONLY works with OEM, LUK or JHM R series B8 S4-S5 clutch kits ONLY. It will NOT work with B8 A4-A5 clutch kits. We specifically designed it this way to take care of higher clamp load more durable options for the S4 and S5 available from us and others.
After years of research, development, prototyping, and testing B8 Lightweight Flywheels and Clutches, we are finally ready to release our long awaited Lightweight Flywheel and Clutch Combo for the B8-A4 and B8-A5 with the 2.0T and 3.2L FSI! We began developing B8 Lightweight Flywheels in 2011 and selling our S4-S5 version since 2013. We like to test all of our products for an extended period of time to verify the durability and longevity of the part before selling it publicly.
We have designed our JHM Lightweight Flywheel for the B8 A4-A5 to work specifically with OEM LUK B8 S4-S5 Pressure Plate that has been proven time and time again to be the ideal balance between performance and OEM style drive-ability.
In addition to working with our JHM R Series Clutch Kit (available in a combo) , we have designed our JHM Lightweight Flywheel for the B8 S4-S5 so that it will work with an OEM stock clutch kit or ANY aftermarket clutch kit designed to work with the OEM B8 S4-S5 Flywheel.
CONCEPT AND DEVELOPMENT:
The OEM Flywheel on the B8 A4 and A5 is a completely new design and a significant departure from Audi's previous flywheel designs. Instead of having the traditional single piece flywheel (i.e. the traditional "dual-mass flywheel") that just bolts to the back of the motor, the B8 A4-A5 flywheel is a two-piece, hourglass shaped, unit which allows Audi to position the motor further back in the chassis for better weight distribution. This is achieved by running a half-shaft through the narrow part of the hourglass shape in the flywheel. This major design change presented a new challenge for us.
OEM B8 A4-A5 FLYWHEEL, 2-PIECE: B8 A4-A5 2.0T and 3.2L FSI Flywheels are dimensionally the same with the only differences being small weight variations and different part numbers.
Beginning in 2011, we tested out our B8 Lightweight Flywheel concept by drilling out the rivets on the OEM unit and re-using the lower half of the OEM flywheel. We replaced the upper, cast-iron, dual-mass flywheel piece with a prototype version of a lightweight aluminum piece that we built in house. Once we were satisfied with the performance of our prototype, we went on making our own lower base out of machined steel, which can be seen above. This was done by completely re-engineering the overall unit for an optimal balance of strength and weight reduction.
This early on research and development for the B8 S4 and S5 has been the building blocks for us to be able to develop the ULTIMATE Lightweight Clutch and Flywheel Combo for the B8 A4-A5 with the 2.0T and 3.2L engines.
WHY A LIGHTWEIGHT FLYWHEEL?
Replacing the OEM, cast-iron, dual-mass flywheel with a single-mass, lightweight, aluminum piece reduces the overall weight of the rotating assembly of the motor. This frees up power in the motor and leads to increased throttle responsiveness. Changing the upper portion of the OEM flywheel to a single-mass unit also eliminates the potential for failure of the dual-mass unit. This is especially important on high-horsepower cars. Finally, the JHM Lightweight Flywheel offers the additional advantage of having a removable friction liner. If you end up replacing your clutch and pressure plate at a later date, you do not need to replace the entire flywheel OR worry about re-surfacing it (which - as of April 2016 - has yet to be done successfully for this large of a unit). Resurfacing would also not be cost effective due to tooling and fixture costs for such a tall, dual-mass flywheel. All you need to do is just replace the removable friction liner.
FLYWHEEL SPECIFICATIONS: At JHM, we have weighed over a dozen OEM flywheels. We have seen a wide range of weight variances even on flywheels with the same part number! On average, the JHM Lightweight Flywheel weighs 7 to 10 lbs less compared to the OEM B8 2.0T or 3.2L FSI Flywheel.
PARTS INCLUDED:
- JHM Aluminum and Machined Steel 2-Piece Lightweight Flywheel
FITMENT: All B8 A4-A5s with 6-speed manual transmissions and the 2.0T or 3.2L FSI Motor. Additionally, we have designed our JHM Lightweight Flywheel for the B8 A4-A5 so that it will work with an OEM B7-RS4 Pressure Plate so it will NOT work with aftermarket clutch kits designed to work with the OEM B8 A4-A5 Flywheel.
- B8 A4 with 2.0T or 3.2L FSI
- B8 A5 with 2.0T or 3.2L FSI
INSTALLATION INSTRUCTIONS AND TORQUE NOTES: These are NOTES ONLY are not a substitute for factory installation manuals or technical expertise. They are to be used a supplemental guideline only. We always recommend that an experienced technician perform ALL clutch and flywheel installations. For shops or individuals who have access to factory manuals but not factory tools, here are some tips and guidelines we have used to complete this job without the factory tools:
- The JHM Lightweight Flywheel installs in the same manner as the OEM Flywheel. Follow the OEM installation and torque procedures.
- Aligning the clutch disc, pressure plate, flywheel assembly: Install the throwout bearing/sleeve onto the transmission. For alignment of the clutch disc it is easiest to put the flywheel face-up, place and align the disc splines on center with the center bearing in the flywheel, put the pressure plate on top, visually check that the disc is still on center, and begin to tighten and torque the pressure plate. The pressure plate bolts need to be secured with red, high-strength Loctite. Make sure the pressure plate bolts are tightened in a star pattern at multiple torque intervals. This is to make sure that the pressure plate diaphragm or fingers are not distorted upon installation. Once the pressure plate is fully torqued to the flywheel with red Loctite to factory specifications (33 ft-lbs, in intervals), the clutch, pressure plate, and flywheel combination can now be slid onto the transmission as you would a torque converter on an Automatic Transmission. If the assembly will not slip on the transmission, this is most likely due to the fact that the disc is not on center. Remove the pressure plate and attempt to re-align the disc. **NOTE: We have successfully aligned the assembly by following the above procedure. It is not that difficult to "eyeball" the alignment.
- Once the clutch and flywheel combo are installed in the transmission, the half-shaft can be re-installed (this prevents the clutch and flywheel from falling out of the transmission while attempting re-installation). Install and bolt the transmission to the engine. Install the JHM supplied bolts for attaching the flywheel to the flexplate. Torque the flyweel to flexplate bolts to factory specifications. This is done in a similar fashion to torquing down a torque converter to a flexplate on an Automatic Transmission.
BREAK IN PROCEDURE: Clutch break-in is important and must be done properly.
During the break-in period ALL racing activities, launching, or aggressive driving that get the clutch hot MUST be avoided!!! For the Stage 3 clutch clutch disc you need to drive about 500 miles of city type driving. Each time the clutch disc is disengaged and reengaged slowly - basically, whenever you start from a stop or shift it aids in break-in. Because of this, highway mileage does not count. For Stage 4 clutch discs you need to drive about 750 miles of city type driving. Due to Kevlar's resistance to wear, it takes longer to break in.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
This product fits the following vehicles:
| Make | Model | Chassis | Engine |
|---|---|---|---|
| Audi | A5 | B8-B8.5 (2008-2016) | all |
| Audi | A4 | B8-B8.5 (2009-2016) | all |
Reviews
Write Your Own Review
Off-road Use
Prop 65
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov
Q and A
You must be logged in to ask questions.
Product Questions
No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)
