Select Vehicle From Dropdown

Front Rotors (pair) JHM 2-piece Lightweight for 4L Q7, Porsche Cayenne - VW Touareg w 350mm rotors

SKU: JHM-2089x350x32

$849.95

Details
Details

The Original Audi Lightweight Rotors engineered and manufactured in the USA since 2010!

 


Click to enlarge picture
Audi S8 Brake Rotors (Rear) | 2-piece Lightweight

Due to popular demand, all of our 2-piece, lightweight rotors will now come with black anodized rotor hats featuring Type 3, hard anodizing, the highest quality and hardest anodizing available for aluminum. This will make the rotor hats more resistant to fade and wear and will hide brake dust better. Due to popular demand all lightweight rotor rings will also feature zinc plating. This high quality coating will slow the effects of corrosion and keep your rotor rings looking good through the winters.

 

These rotors shave 20 lbs of unsprung weight from the front of your car while increasing braking performance, plus they bolt on just like stock! This is great alternative to a full on Big Brake Kit since the stock 4L Q7, Cayenne, and Touareg rotor is already a stout 350mm (13.8") and most may not want to spend $2,000 plus for a full Big Brake Kit. We basically brought the same high performance great cooling designed rotor to these drop in (fit like stock) front rotors and at a 1/4 of the price or less of a full Big Brake Kit.

 

Stock vs. JHM
-Rotor Weight: Stock = 28.5lbs(each), JHM = 18.5lbs(each) - 35% LIGHTER, 10 lbs less each
-Rotor Cooling Air-gap: Stock = 16.15mm(.635"), JHM = 18.5mm(.728") - LARGER for better cooling
-Rotor Cooling Center Fin Design: Stock = Airfoil, JHM = Airfoil - MORE EFFICIENT for better cooling
-Rotor OD: Stock = 350mm(13.8"), JHM = 350mm(13.8") - SAME
-Rotor Thickness: Stock = 34mm(1.34"), JHM = 32mm(1.18")
-Bolt pattern: - SAME (fits like an OEM rotor would)

 

INCLUDES: 2 - JHM 2-piece Lightweight Front Rotors. (Each rotor weighs 10 lbs less than stock for a total of 20lbs weight savings.) 35% lighter!

 

Outer ring specs:
We worked closely with a race brake manufacturer that supplies many NASCAR racers and a couple major brake kit companies. Due to their expertise we chose to have them build us the outer rings to our specs to fit the 4L Q7, Cayenne, and Touareg. The rings feature 12 attachment points for durability and strength.

 

Center hat specs:
We CNC machine the Aluminum center hats in house based on their recommended materials and thicknesses for durability. 12 attachment points for durability and strength. We also engrave JHM in them in 3 locations equal from each other, it looks clean and doesn't jump out or look tacky.

 

Click to enlarge picture
Audi B8 S4-S5 Brake Rotors (Rear) 2-piece Lightweight

 

NOTE: With the installs we have done we have found that our slot design is whisper quiet.
Click to enlarge picture
Audi B8 S4-S5 Brake Rotors (Front) 2-piece Lightweight

 

NOTE: Due to differing scale calibrations our estimates on our rotors are slightly high.

 

Please note: JH Motorsports does not recommend using EBC brake pads with our 2-piece lightweight rotors. Customer have reported and we have found EBC pads leave excessive pad deposits that can cause brake pulsation. Many EBC pads have a break in coating that reacts with the zinc plating used on our rotors

 

 

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.



This product fits the following vehicles:
Make Model Chassis Engine
Audi Q7 4L (2007-2015) all
Volkswagen Touareg 1 (2004-2007) all
Volkswagen Touareg 2 (2008-2010) all
Reviews
Write Your Own Review
You're reviewing: Front Rotors (pair) JHM 2-piece Lightweight for 4L Q7, Porsche Cayenne - VW Touareg w 350mm rotors
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)
JHM Supercharger Kit for B8-S5 w/ 4.2L FSI V8, Stage 1 JHM Supercharger Kit for B8-S5 w/ 4.2L FSI V8, Stage 1
1 Review(s)

Select options & add to cart to view final price
From: $7,559.95

To: $8,704.95

Intercooler Kit - Front Mount or FMIC (JHM) Large Core for B7-A4 2.0T - BLACK COUPLERS Intercooler Kit - Front Mount or FMIC (JHM) Large Core for B7-A4 2.0T - BLACK COUPLERS
1 Review(s)

Select options & add to cart to view final price
From: $1,149.95

To: $1,179.95