- Carbon Cleaning Tool Kit (JHM) for ALL FSI, TSI and TFSI Direct Injection Engines
Carbon Cleaning Tool Kit (JHM) for ALL FSI, TSI and TFSI Direct Injection Engines
JHM Oil Separator Heater Bypass Kit for B8-S5 4.2L FSI V8$11.95Add to Cart | Wishlist
Exhaust - Race Pipe - Stainless Steel (JHM) for B9 S4-S5 3.0T$1,199.95Add to Cart | Wishlist
Intercooler Kit - Front Mount or FMIC (JHM) Large Core for B7-A4 2.0T - BLACK COUPLERS
Select options & add to cart to view final price
Excessive carbon buildup will cause a reduction of airflow as well as smooth airflow into the combustion chamber. Some of the common byproducts of this is reduced fuel mileage, reduced engine power, misfires, and poor idle. When performing a carbon cleaning, you will want to perform the work on the valves that are closed (rotate engine as you go to be able to clean all valve pockets). Fill the valve pocket in the head with the cleaning solution and let it sit for a few hours. After the pocket has been soaking in solution, you will want to use the supplied brush to scrub the pocket clean (insert the brush into a standard drill for optimal performance). Once you have finished with the brush, use the supplied picks to get the areas behind the valves that could not be reached with the brush. NOTE: During this time would be a great time to install intake spacers if they are available for your engine. Please go back one section to see if they are available for your car. NOTE: If you need cleaning solution for the job, we have some available! Please go back one section to grab the cleaning solution. NOTE: Clean with caution. You are dealing with the cylinder head valves which are a crucial part of the engine. Letting the solution soak for a few hours allows you to gently clean the valve pockets.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system. Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.
As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).
Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov
Select options & add to cart to view final price