Select Vehicle From Dropdown

JHM High Pressure-Mechanical Fuel Pump Upgrade Kit, HPFP for Audi and VW 2.0T FSI

SKU: JHM-HPFPUpg20T

$379.95

* Required Fields

Details
Details

Introducing the JHMotorsports, Inc. High Pressure Fuel Pump Upgrade for the 2.0T FSI Motors!!!

Our brand new, JHM High Pressure Fuel Pump (HPFP) Upgrade will help you get the most out of the direct injection fueling system on your 2.0T FSI. Not only does the upgrade increase the amount of fuel your high pressure fuel pump can deliver but it will also decrease the duty cycle of the N276 solenoid on your pump. Lowering the duty cycle of the N276 will extend the life of this solenoid - an item that commonly fails on these pumps but isn't available separately. We tested these upgraded internals on stock ECU tuning and our standard "Stage 1" ECU tuning and found that there were no issues. So, even a standard stock or Stage 1 car will see benefits from running these internals; not only do you extend the life of the N276 solenoid since it is not working as hard but you already have an upgraded HPFP giving you more headroom in your fueling system should you decide to do more modifications.

In true JHM fashion, we have been performing long term testing on these parts since 2013. These upgraded internals were featured on our JHM B7-A4 2.0T Stage 3 car which ran a 12.87 second quarter mile at 106 miles per hour.

Our HPFP Upgrade will fit all all Audis and Volkswagens with Hitachi High Pressure Fuel Pumps. This includes the Audi B7-A4 2.0T FSI, B7-RS4 4.2L FSI V8, B8-S5 4.2L FSI V8 and Volkswagen Mark V and VI GTIs and GLIs with the 2.0T FSI. This upgrade does not fit newer TSI motors with Bosch pumps.

NOTE: This is the JHM HPFP Upgrade for the 2.0T FSI motors. If you are interested in the upgrade kit for your 4.2L V8 FSI, please go back to the "Engine and Performance" section of the RS4 or S5 or search our website for "JHM HPFP V8".

Click to enlarge picture

Click to enlarge picture

Click to enlarge picture

NOTE: JHM Internals shown pre-installed in pump.

FEATURES
- Piston has 50% more area than OEM (OEM Piston Size: 8.0mm versus JHM Piston Size: 9.8mm)
- Piston head optimized for ideal fuel flow direction
- Piston surface hardened before coating
- Piston machined after coating
- Upgraded spring, slightly stiffer than OEM for improved high RPM piston stability
- Uses OEM-style spring keeper

PARTS INCLUDED
- 1x Upgraded Piston w/ Directional Flow Head
- 1x Upgraded Spring
- 1x Spring Keeper and Tappet Assembly
- 1x Piston Cylinder or Sleeve
- 1x Installation tool

FITMENT: The JHM High Pressure Fuel Pump Internals Upgrade Kit will fit all 2.0T FSI motors with the Hitachi fuel pumps. Basically, ALL 2.0T FSI motors with a timing belt (as opposed to a timing chain). This includes - but is not limited to - the following cars:
- Audi B7-A4 (BPG, BWT engine codes)
- Audi 8P A3-S3
- Audi Mark II TT
- Volkswagen Mark V GTIs, GLIs, Jetta
- Volkswagen Mark VI Golf R
- Volkswagen B6 Passat

NOTE: Does not fit the newer Audi-VW cars with "TSI" motors and Bosch high pressure pumps.

INSTALLATION AND INSTRUCTIONS


For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.


Notice:

Off-road use ONLY: THIS PRODUCT IS FOR RACING COMPETITION ONLY AND IS NOT LEGAL FOR USE IN HIGHWAY OR STREET VEHICLES OR OTHER NON-RACING COMPETITION OFF-ROAD VEHICLES. BY PURCHASING THIS PRODUCT YOU ACKNOWLEDGE ITS INTENDED USE.

This product fits the following vehicles:
Make Model Chassis Engine
Volkswagen Jetta MK V (2005-2010) 2.0t FSI
Volkswagen R MK VI (2012-2013) 2.0t TSI
Audi TTS 8J (2009-2015) 2.0t TFSI
Volkswagen Passat B6 (2006-2010) 2.0t FSI
Volkswagen EOS MK V (2007-2016) 2.0t FSI
Audi A4 B7 (2005.5-2009) 2.0t FSI
Audi A3 8P (2006-2013) 2.0t FSI
Volkswagen GTI MK V (2006-2009) 2.0t FSI
Audi TT 8J (2008-2015) 2.0t FSI
Reviews
Write Your Own Review
You're reviewing: JHM High Pressure-Mechanical Fuel Pump Upgrade Kit, HPFP for Audi and VW 2.0T FSI
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

Sort by ASC
Will these internals work with an aftermarket tune and pump from another company? My car was tuned by APR, and has an APR HPFP installed (or did, until it broke) and I would hate to have any compatibility issues.
0
Will this work with the iABED FSI Cam Follower Roller Conversion Kit?
0
You may also be interested in the following product(s)