Select Vehicle From Dropdown

JHM Trio Package - Solid Shifter, Linkage and Bushing for B6/B7 S4/RS4




The 2004 and up B6/B7 S4 and RS4 "Trio" Package

This package includes: JHM "Solid" Short Throw Shifter, Delrin Shifter Stabilizer Bushing and the "Solid" Linkage Upgrade

Guaranteeing the ultimate shifting experience.

You save $$ vs. buying these three items separately.

B6/B7 S4/RS4 Solid Shifter

NEW AND IMPROVED! Why? Even though we were already dominating the market with the most engineered and built shifter available for the B6/B7 S4 and RS4, in true JHM style we knew we could make it just that tiny bit better. After months of R&D we made some minor revisions to the shaft that really aid in adjustment. Why would we do this? There was a debate about the degree of difficulty for the adjustment of Reverse and 1st-2nd, some people said it was easy and some said it was hard. So we spent the last several months making some small revisions to make it easier for everyone without changing our superior shifting quality. NOTE: If you purchased a shifter from us in the past prior to this update and want it updated for easier adjustment, email us at for the FREE update program which includes free return shipping.

B6/B7 S4/RS4 Solid Shifter, Linkage & Bushing

New JHM Steel shaft, JHM solid pivot assembly, Tig Welded Steel lower link, Delrin Bushings, New pushdown reverse springs (stock, medium and stiff), 4 bushings to allow more clearance in the shifter box for the most throw reduction possible and all other hardware. Retains stock shifter knob. Instructions are not included with the package, just use the video and document links below and watch prior to installing.

COMES COMPLETELY ASSEMBLED (retains pushdown reverse) Ready to be installed into your factory base.

B6/B7 S4/RS4 Solid Shifter

Our B6/B7 S4 and RS4 specific shifter is configured as follows. 1/2" shorter knob height and 40% and 25% reduction settings (you adjust as needed, ships in the most popular 40% setting). See this pic for more info regarding the adjustment -->HERE

B6/B7 S4/RS4 Solid Shifter, Linkage & Bushing

Additional pushdown reverse springs included for those aggressive drivers that have the tendency to accidentally push the shifter down while shifting. Comes assembled with the soft spring (plain) and comes with a medium (silver) and stiff (gold) spring to taylor to your liking.



Supplemental install instructions (adjustment of the 6-speed type shifter) -->HERE

UPDATED supplemental adjustment procedure for B6/B7 S4 and RS4 only. -->HERE

Install Notes for the shifter spacers-->HERE

B6/B7 S4/RS4 Solid Shifter, Linkage & Bushing

If you desire the ultimate in shifting, the JH Motorsports B6/B7 S4 and RS4 Solid Linkage Upgrade is the perfect solution. This linkage upgrade replaces the OEM rubber/plastic socket assembly with a steel spherical bearing (similar to what the JHM Solid Shifter does for the OEM shifter box). This will give you a full mechanical race car feel, and eliminates sloppiness allowing you to optimize shifts on the street or at the track. The linkage is most purposeful when used with the JHM Solid Shifter and the JHM Delrin Shifter Stabilizer Bushing, however these parts will compliment any SS kit, including stock shifters.

To completely upgrade your stock shifting components for the best possible shifts, make sure to add our Solid Short Throw Shifter and the Solid Stabilizer Bushing to your order if you do not already have them.

B6/B7 S4/RS4 Solid Shifter, Linkage & Bushing

INCLUDES THE FOLLOWING - JHM Modified OEM shift shaft link (Updated OEM version with weight to aid in shifting ease and performance) ($80 from dealer), JHM Modified Steel Spherical bearing, stainless steel spacers, all hardware, loctite and synthetic grease.

(This linkage is located at the transmission and is separate from our shifter) This linkage fits all B6/B7 S4 and RS4 6-speeds. The removal of the linkage rod is time consuming and is easiest done when doing a clutch replacement or downpipe replacement. It can be done without either of those, but to save on labor it is best done when performing one of those mods or jobs.

COMES AS A COMPLETE DO IT YOURSELF KIT Only some cutting is required to allow proper clearance.


This install video was done on a B5 S4 linkage, however the install process is the same.
NOTE: This video covers the installation of only the actual kit once the linkage rod is removed from the car.

NOTE: This video helps you have a better understanding of the linkage and how this shift rod would be removed for replacement.



NOTE: Some cutting of your OEM linkage rod is required, other than that, this is a full bolt in kit.

INCLUDES THE FOLLOWING - JHM Delrin 2-piece bushing to replace the OEM rubber bushing, 1 - steel washer, 1 - Mounting bolt and 1-steel bushing insert.

(This bushing is located at the transmission and is separate from our shifter)


NOTE: This video is just a guide. The install was done on a 5 speed car, on a 6 speed car the bushing is on top of the trans and is more difficult to access.

NOTE: This video helps you have a better understanding of the linkage and how this bushing would be replaced.


NOTE: This bushing will transfer more noise and vibration to your shifter and shifter box vs. the stock rubber bushing. This is what gives you the enhanced feel and confidence when shifting. This is recommended for serious enthusiasts only; who want to fully compliment their JHM solid short throw shifter and linkage upgrade and want their car to shift as precise as possible.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.

This product fits the following vehicles:
Make Model Chassis Engine
Audi RS4 B7 (2006-2009) 4.2l V8 32v FSI
Audi S4 B7 (2005.5-2009) 4.2l V8 40v
Audi S4 B6 (2003-2005) 4.2l V8 40v
Customer Reviews (2)
I purchased the JHM supercharger kit, Cat back, Downpipes, Trio and more.
My car finally feels like how it should have been built from the beginning. The visceral connection is hard to describe, the power is extraordinary, the shifting is incredible, the exhaust note is so sublime I keep turning off the radio just so I can hear it better. I am now dreaming of a built motor. You are the best!


Review by Mark (Posted on 11/1/2013)
Not an out and out speed mod, but this WILL make your car more fun to drive. The shifter is something you use thousands of times a year and this one makes the car feel like a Porsche or Ferrari. This is a massive improvement over stock, typical JHM over-engineering. Coupled with the 034 trans mount, the car feels new again. Review by Adrian (Posted on 1/1/2012)
Write Your Own Review
You're reviewing: JHM Trio Package - Solid Shifter, Linkage and Bushing for B6/B7 S4/RS4
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More:

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)