- JHM Trio Package - Solid Shifter, Linkage and Bushing for 2000-2001.5, B5 S4, Early Style
JHM Trio Package - Solid Shifter, Linkage and Bushing for 2000-2001.5, B5 S4, Early Style
JHM Oil Separator Heater Bypass Kit for B8-S5 4.2L FSI V8$11.95Add to Cart | Wishlist
JHM HD Linkage Cross Rod (Early) for B5-S4, C5 A6-allroad$199.95Add to Cart | Wishlist
The S4 "Trio" Package
This package includes: JHM "Solid" Short Throw Shifter, Delrin Shifter Stabilizer Bushing and the "Solid" Linkage Upgrade
Guaranteeing the ultimate shifting experience.
You save $$ vs. buying these three items separately.
JHM "Solid" shifter for S4, 2000-2001.5(early)PROUDLY DESIGNED AND BUILT IN CALIFORNIA
INCLUDES THE FOLLOWING - new JHM Steel shaft, JHM solid pivot assembly, Tig Welded Steel lower link, Delrin Bushings, New pushdown reverse springs (stock, medium and stiff) and all other hardware. Retains stock shifter knob. Instructions are not included with the package, just use the video links below and watch prior to installing. COMES COMPLETELY ASSEMBLED Ready to be installed into your factory base. CLICK HERE to determine your shifter year and confirm your car is really an early or late style. VIEW COMPARISON VIDEO -->HERE VIEW SHIFTING DEMONSTRATION VIDEO -->HERE VIEW INSTALLATION VIDEO -->HERE PICTURE OF A DISASSEMBLED JHM SHIFTER -->HERE PICTURE OF A OUR EXCLUSIVE PIVOT ASSEMBLY -->HERE
NEW! - INCLUDED OPTION WITH ALL SHIFTERS - FREE!
Pushdown Reverse Spring Stiffness: Additional pushdown reverse springs included for those aggressive drivers that have the tendency to accidentally push the shifter down while shifting.
European pre 2000 w metal base: Pre 2000 European S4s need the updated 00-02 plastic oem base to run our shifter. CLICK HERE to determine your shifter year. Purchase this part separately by searching for SKU: OEM-8D0711026B named "Shifter Base (OEM) for B5 S4 and C5 A6/Allroad"
NOTE: Shifters come with 2 reduction settings. About 35% and 10%. They ship already in the 35% reduction setting. See this pic for more info HERE
JHM Delrin shifter stabilizer bushing for S4, 2000-2001.5(early)
INCLUDES THE FOLLOWING - JHM Delrin 2-piece bushing to replace the OEM rubber bushing, 1 - steel washer, 1 - Mounting bolt and 1-steel bushing insert. (This bushing is located at the transmission and is separate from our shifter) CLICK HERE to determine your bushing year. The bushings are different depending on which shifter design your car has. VIEW COMPARISON VIDEO -->HERE VIEW INSTALLATION VIDEO -->HERE
NOTE: This video is just a guide. The install was done on a 5 speed car, on a 6 speed car the bushing is on top of the trans and is more difficult to access. VIEW INFORMATIONAL VIDEO ABOUT THE LINKAGE ON CARS EQUIPPED WITH A 6 SPEED -->HERE
NOTE: This video helps you have a better understanding of the linkage and how this bushing would be replaced. PICTURE OF THE JHM BUSHING VS. STOCK -->HERE
NOTE: This bushing will transfer more noise and vibration to your shifter and shifter box vs. the stock rubber bushing. This is what gives you the enhanced feel and confidence when shifting. This is recommended for serious enthusiasts only; who want to fully compliment their JHM solid short throw shifter and linkage upgrade and want their car to shift as precise as possible.
JHM Solid Linkage Upgrade for B5 S4, 2000 - 2002
INCLUDES THE FOLLOWING - JHM Modified OEM shift shaft link ($80 from dealer), JHM Modified Steel Spherical bearing, stainless steel spacers, all hardware, loctite and synthetic grease. (This linkage is located at the transmission and is separate from our shifter) This linkage fits all B5 S4 6-speeds. COMES AS A COMPLETE DO IT YOURSELF KIT Only some cutting is required to allow proper clearance. VIEW COMPARISON VIDEO -->HERE VIEW INSTALLATION VIDEO -->HERE
NOTE: This video covers the installation of only the actual kit once the linkage rod is removed the car. VIEW INFORMATIONAL VIDEO ABOUT THE LINKAGE ON CARS EQUIPPED WITH A 6 SPEED -->HERE
NOTE: This video helps you have a better understanding of the linkage and how this shift rod would be removed for replacement. PICTURE OF THE JHM LINKAGE UPGRADE VS. STOCK -->HERE PICTURE SHOWING THE DETAILS OF THE INSTALL -->HERE
NOTE: Some cutting of your OEM linkage rod is required, other than that, this is a full bolt in kit.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
|Audi||S4||B5 (1997-2002)||2.7t V6 30v|
|Audi||RS4||B5 (1999-2001)||2.7t V6 30v|
By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system. Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.
As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).
Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov
Select options & add to cart to view final price