- JHM Trio Package - Solid Shifter, Linkage and Bushing for 1998-1999, B5 A4, Passat, Early (w/ Shifter Base)
JHM Trio Package - Solid Shifter, Linkage and Bushing for 1998-1999, B5 A4, Passat, Early (w/ Shifter Base)
JHM Helical Rear LSD for B6-B7 A4 S4 Manual Transmission (EXZ, ETS, HNP, HUQ) - Pre-built Outright Sale - Only One Left$1,799.95
JHM Supercharger Kit for B8-S5 w/ 4.2L FSI V8, Stage 1
Select options & add to cart to view final price
JHM HD Linkage Cross Rod (Early) for B5-S4, C5 A6-allroad$199.95Add to Cart | Wishlist
JHM R Series Lightweight Flywheel (Chrome-Moly Forged) and Clutch Combo for B7-RS4
Select options & add to cart to view final price
The 1997 to 1999.5 B5 A4 "Trio" Package (Early)
This package includes: JHM "Solid" Short Throw Shifter, Delrin Shifter Stabilizer Bushing and the "Solid" Linkage Upgrade
Guaranteeing the ultimate shifting experience.You save $$ vs. buying these three items separately.
JHM "Solid" shifter for A4, 1997 - 1999.5(early)PROUDLY DESIGNED AND BUILT IN CALIFORNIA
NOTE: This shifter will also include an OEM plastic base from the newer 1999.5 to 2001.5 B5 A4 thus upgrading you to the newer design and eliminating your Push Down Reverse feature for better performance just like all 99.5 and up 5-speed A4s. CLICK HERE to determine your shifter year and confirm your car is really an early (push down reverse) or late style (non-push down reverse). INCLUDES THE FOLLOWING - new JHM Steel shaft with optimized length, JHM solid pivot assembly, Tig Welded Steel lower link, Delrin Bushings and all other hardware. Retains stock shifter knob. Instructions are not included with the package, just use the video links below and watch prior to installing. COMES COMPLETELY ASSEMBLED Comes fully installed in the new updated OEM base. VIEW COMPARISON VIDEO -->HERE VIEW SHIFTING DEMONSTRATION VIDEO -->HERE VIEW INSTALLATION VIDEO -->HERE
Supplemental install instructions (adjustment of the 5-speed type shifter) -->HERE PICTURE OF A DISASSEMBLED JHM SHIFTER -->HERE PICTURE OF A OUR EXCLUSIVE PIVOT ASSEMBLY -->HERE
NOTE: Shifters come with 2 reduction settings. About 25% and 10%. They ship already in the 25% reduction setting. See this pic for more info HERE
JHM Delrin shifter stabilizer bushing for B5/B6 A4 5-speed, 1997 - 2004
INCLUDES THE FOLLOWING - JHM Delrin 2-piece bushing to replace the OEM rubber bushing, 1 - steel washer, 1 - Mounting bolt and 1-steel bushing insert. (This bushing is located at the transmission and is separate from our shifter) VIEW COMPARISON VIDEO -->HERE VIEW INSTALLATION VIDEO -->HERE PICTURE OF THE JHM BUSHING VS. STOCK -->HERE
NOTE: This bushing will transfer more noise and vibration to your shifter and shifter box vs. the stock rubber bushing. This is what gives you the enhanced feel and confidence when shifting. This is recommended for serious enthusiasts only; who want to fully compliment their JHM solid short throw shifter and linkage upgrade and want their car to shift as precise as possible.
JHM Solid Linkage Upgrade for B5/B6 A4 5-speed, 1997 - 2004
Complete linkage upgrade kit for B5/B6 A4/Passat, 1997 - 2004 w 5-speed transmission only. This upgrade fits ALL 1998-2004 A4s and only SOME 1997s with the U-joint style linkage. Click here to verify your linkage style if you have a 97. NOTE: If you have a 1996 or 1997 A4 and get a U-joint style linkage rod from a 1998-2001 A4 you can use this kit. INCLUDES THE FOLLOWING - JHM Steel u-joint to replace the OEM rubber joint, 4 - PTFE washers, 2 - New hardened shoulder bolts w locking nuts and synthetic grease. (This linkage is located at the transmission and is separate from our shifter.) This linkage fits all B5 B6 A4s and Passats with 5-sped transmissions. COMES AS A COMPLETE DO IT YOURSELF KIT Only drilling is required to remove the factory rubber joint. VIEW COMPARISON VIDEO -->HERE VIEW INSTALLATION INSTRUCTIONS -->HERE PICTURE OF THE JHM LINKAGE UPGRADE VS. STOCK -->HERE
NOTE: Some drilling is required to remove the factory rubber joint. See instructions above.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system. Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.
As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).
Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov