Select Vehicle From Dropdown

JHM Oil Cooler Line Upgrade (FOR JHM SC KITS ONLY) and -12AN Conversion Kit for B7-RS4

SKU: JHM-8E0117316-8E0117315-kit-JHM-SC-KIT-ONLY


***Introducing the JHMotorsports Oil Cooler Line Upgrade and -12AN Conversion Kit for the B7-RS4!!!***

NOTE: This kit is the same as our other kit, it just has longer oil lines to work with our JHM supercharger kit. The lines are longer to make room for our blower. If you do NOT have our blower kit order the other kit on our site. Thanks.

We have been testing this kit on our shop B7-RS4 for over a year and have even installed a few kits for local customers. Now that we've finalized the kit for production, we're ready to sell it!

At JHMotorsports we have had first hand experience with failed OEM Oil Lines on our shop B7-RS4 and several of our customers' RS4s. The stock oil lines are incredibly thin and aren't very durable at all. In combination with these factors and they way they are routed from the factory, the stock oil lines are prone to failure. We have seen everything from worn lines to the point of fraying all the way to complete failure and puncture leading to nearly a total loss of all oil in the motor.

Click to enlarge picture
Audi Oil Cooler and Auxiliary Radiator Delete Kit for B6-B7 S4

Notice how thin the stock oil line is. There is barely a thin rubber layer surrounding a very rough and ridged inner plastic lining - which is also incredibly thin! When compared to the new, upgraded -12AN JHM lines, the advantages are clear. Our lines have a thick and sturdy rubber layer that is almost five times the thickness of the OEM rubber lining and over two times as thick as the OEM rubber and plastic lining combined! Not only that, but the JHM Upgraded Lines feature a smooth inner surface where the oil flows through allowing for less resistance in oil flow.

Not only does this kit address a weak and faulty component of the B7-RS4 Motor, it also has the added benefit of converting your oil lines to -12AN. On top of all this we engineered them to have more ground clearance than the OEM oil cooler lines. JHM has made a pair of custom adapters that convert the stock oil line fittings to -12AN sizing. This allows you to have the ability to upgrade your RS4 to an aftermarket, upgraded oil cooler core down the road. Here at JHM, we have been testing a few different cooler cores on our shop B7-RS4 and others and have found minimal to no gains over the last few years. This is due to the fact that the factory oil cooler core performs quite well for most weekend road course warriors. NOTE: We have made these oil lines specifically to fit the location and size of the stock oil cooler. These lines may work with cores in different locations or in different sizes if you modify the routing and/or the routing of the lines. We assemble the lines here at JHM, so if you are interested in custom length oil lines, give us a call and we'll help you out.

Click to enlarge picture
Audi Oil Cooler and Auxiliary Radiator Delete Kit for B6-B7 S4

If your stock oil lines wear out, are rubbing through, or have completely failed DON'T GET STUCK IN THE CAGE OF USING ONLY OEM PARTS. As of the release of this kit, OEM RS4 Oil Cooler Lines retail for as much as $375 and $275 EACH! Even the generic parts "warehouses" sell these lines for $364.70 and $267.45. That's over $630!!! Don't buy OEM lines again and restrict yourself to only using OEM parts. Buy the JHM Upgraded Oil Cooler Line Conversion and Upgrade kit and give yourself the freedom to run the OEM Oil Cooler or upgrade to another cooler down the road!

The JHM B7-RS4 Oil Line Upgrade and -12AN Conversion Kit includes the following parts:
- 2x JHM Stainless Steel Upper Oil Pan to -12AN Male adapters (with o-rings)
- 2x JHM OEM Metric Oil Cooler to -12AN Male Adapters (NOTE: These are shown as attached to the oil cooler lines in the picture above. These will be shipped disconnected from the pre-made -12 AN lines.)
- 2x Stainless, Braided -12AN Hose Lines (custom JHM specified lengths and fittings)
- 1x Rubber Stand-Off for Power Steering Cooler (Longer than stock to allow extra space for fittings and larger lines)
- 2x Rubber Lined Steel Clamps that mount under the factory nuts for Power Steering Cooler to secure JHM Oil Lines above the oil cooler

Installation pics and notes HERE

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.

This product fits the following vehicles:
Make Model Chassis Engine
Audi RS4 B7 (2006-2009) 4.2l V8 32v FSI
Write Your Own Review
You're reviewing: JHM Oil Cooler Line Upgrade (FOR JHM SC KITS ONLY) and -12AN Conversion Kit for B7-RS4
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More:

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)