Select Vehicle From Dropdown

JHM Intake Manifold Spacers (5mm thick, Phenolic) for B6-A4 and C5-A6 w 3.0L V6



Sale Price $135.96

This is a phenolic intake manifold spacer kit for the B6-A4 with the 3.0 V6. These spacers are 5mm thick and made of phenolic material to prevent heat rising off of the cylinder head from soaking the intake manifold. Increasing the length of the intake runner also provides a small torque increase!

Precision CNC machined.

Includes 16 longer high grade bolts, 16 washers, and 2 gaskets - everything you need to for a complete installation.

**NOTE: The 3.0L Intake Manifold has a rubber sealing surface on the manifold so you shouldn't need an extra set of gaskets to install this spacer kit. You'll install the spacers and gaskets in the following order: head, gaskets, spacers, manifold. Make sure you clean any dirt or grit out of the stock rubber seals prior to reassembly. All intake manifold bolts will need a washer and should be torqued to 10nm. We recommend torquing them at least twice to make sure previously torqued bolts are have remained tight after other bolts are torqued and the gaskets settle in.

The 3.0l V6 engines have a very brittle and fragile PCV breather hose system that tends to fall apart with age. It is highly recommended you purchase our B6-A4 3.0l PCV breather hose repair kit to replace all these hoses while installing your JHM intake spacers to save on labor. That kit can be found in our store under the same section as these Intake Spacers: "Engine and Performance".

A helpful zip file with pictures of the install and throttle body heater bypass courtesy of JHM. Click Here.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.



This product fits the following vehicles:
Make Model Chassis Engine
Audi A4 B6 (2002-2005) 3.0l V6 30v
Audi A6 C5 (1998-2004) 3.0l V6 30v
Write Your Own Review
You're reviewing: JHM Intake Manifold Spacers (5mm thick, Phenolic) for B6-A4 and C5-A6 w 3.0L V6
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More:

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)
JHM Supercharger Kit for B8-S5 w/ 4.2L FSI V8, Stage 1 JHM Supercharger Kit for B8-S5 w/ 4.2L FSI V8, Stage 1
1 Review(s)

From: $7,200.00

Sale Price

Select options & add to cart to view final price
From: $6,119.96

To: $7,264.96

JHM HD Linkage Cross Rod (Early) for B5-S4, C5 A6-allroad JHM HD Linkage Cross Rod (Early) for B5-S4, C5 A6-allroad
3 Review(s)


Sale Price $169.96