Select Vehicle From Dropdown

Auxiliary Heat Exchanger Kit (BLACK CORE) w PS Cooler - Bolt-On Performance Dual-Pass (JHM) for C6 A6 3.0T

SKU: JHM-PMPHXC6A630T-BLACK

$570.00

Sale Price $484.46

Details
Details

INTRODUCING The JHM C6-A6 3.0T Performance Auxiliary Heat Exchanger Kit!

If you want the RAW aluminum SILVER core, please visit that product page.


When upgrading your Audi 3.0T keeping the IATs down is a must for optimal performance. Our JHM Performance Auxiliary Heat Exchanger Kit is designed to significantly reduce your air intake temperatures using the tried and true, Dual-Core design. Installation of our HX kit is now easier than ever, without the need of removing the crash bar to drill holes for bracket mounting. Our one-piece easy install bracket allows you to hold the core in place, center it, and run the provided self-drilling bolts into the crash bar. Mounting the heat exchanger to the crash bar takes less than 5 minutes! All installation fittings, hose, clamps, and bolts included.

The JHM Performance Auxiliary Heat Exchanger is run in addition to your factory Heat Exchanger, increasing the cooling capacity by 315 Cubic Inches.  That's over 70% more volume over your factory configuration! With our thick auxiliary dual-pass core with unobstructed airflow, you will be lowering our overall IATs at WOT and significantly improving IAT recovery time. 

 

Features:

• Efficient Dual-Core Design 

• 315 Cubic inch Volume Increase

• 70% More Cooling Capacity 

• One Piece Easy Install Stainless Steel Bracket

• Bleeder on the top of the core

• High Fin Density Core

• Lightweight Construction

• Upgraded Power Steering Cooler

• All Installation Hardware Included

 

NOTE: Cars with Distronic ACC will need to have it removed or relocated in order to fit this HX.



This product fits the following vehicles:
Make Model Chassis Engine
Audi A6 C6 (2005.5-2011) 3.0t V6 24v SC
Reviews
Write Your Own Review
You're reviewing: Auxiliary Heat Exchanger Kit (BLACK CORE) w PS Cooler - Bolt-On Performance Dual-Pass (JHM) for C6 A6 3.0T
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

Hi,

Does this replace OE Part# 4F0 145 804 K? I assume so but just want to double check. Thank you.
0
You may also be interested in the following product(s)