Select Vehicle From Dropdown

Front Rotors (pair) JHM 350mm for Cayenne Caliper on B5 S4, C5 A6-allroad, B6-B7 A4-S4

SKU: JHM-1021x350x32

$825.00

Details
Details
The Original Audi Lightweight Rotors engineered and manufactured in the USA since 2010!



Click to enlarge picture
Audi S8 Brake Rotors (Rear) | 2-piece Lightweight

Due to popular demand, all of our 2-piece, lightweight rotors will now come with black anodized rotor hats featuring Type 3, hard anodizing, the highest quality and hardest anodizing available for aluminum. This will make the rotor hats more resistant to fade and wear and will hide brake dust better. Due to popular, demand all lightweight rotor rings will also feature zinc plating. This high quality coating will slow the effects of corrosion and keep your rotor rings looking good through the winters.

IN STOCK AND READY TO SHIP!

FINALLY a low cost front BB (Big Brake) solution for your B5 S4 that uses the popular Porsche Cayenne caliper that bolts right to your stock spindle with NO MODIFICATIONS! Only minor clearancing of the spindle for the rotor. NOTE: These rotors require the use of Cayenne 6-piston brembo calipers to do this conversion. The price on this page is only for the rotors. We sell optional hardware and brake lines to make the swap easier as well.

Stock 321mm vs. JHM 350mm 2-piece for the Porsche Cayenne Caliper
-Rotor OD: Stock = 321mm(12.6"), JHM = 350mm(13.8") - 1.2" larger
-Rotor Thickness: Stock = 30mm(1.18"), JHM = 32mm(1.26") - thicker
-Rotor Weight: Stock = 21lbs(each), JHM = 17lbs(each) - 20% LIGHTER, 4lbs less each
-Rotor Cooling Air-gap: Stock = 11mm(.433"), JHM = 18.5mm(.728") - LARGER for better cooling
-Rotor Cooling Center Fin Design: Stock = Straight Fin, JHM = Airfoil - MORE EFFICIENT for better cooling
-Bolt pattern: - SAME (fits like an OEM rotor would)

Why the Porsche Cayenne caliper? With its 6-piston design and MASSIVE brake pads it is a strong performer. Also it bolts right up to your spindles with NO brackets. All you need is some bolts, nuts, brake lines and JHM rotors and you have a 350mm BBK. Being that it is an OEM part they are readily available and can be found used for great prices.

INCLUDES: 2 - JHM 2-piece Lightweight Slotted Front Rotors. (Each rotor weighs 4lbs less than stock for a total of 8lbs weight savings.) 20% lighter!

OPTIONS:
- Go back one section if you need a hardware kit for adapting the calipers to your car (bolts, washers and nuts).
- Go back one section if you need need stainless brake lines that adapt these calipers to the B5 S4.

Click to enlarge picture
Audi Front Rotors(pair) 350mm for Cayenne Caliper on B5 S4

Click to enlarge picture
Audi Front Rotors(pair) 350mm for Cayenne Caliper on B5 S4

Click to enlarge picture
Audi Front Rotors JHM 350mm, Cayenne Caliper C5/A6/S6

Outer ring specs:
We worked closely with a race brake manufacturer that supplies many NASCAR racers and a couple major brake kit companies. Due to their expertise we chose to have them build us the outer rings to our specs to fit the B5 A4/S4 with a Cayenne caliper bolted on. 12 attachment points for durability and strength.

Center hat specs:
We CNC machine the Aluminum center hats in house based on their recommended materials and thicknesses for durability. 12 attachment points for durability and strength. We also engrave JHM in them in 3 locations equal from each other, it looks clean and doesn't jump out or look tacky.

Click to enlarge picture
Audi B8 S4-S5 Brake Rotors (Rear) 2-piece Lightweight

Note: This brake upgrade only fits under most 18" wheels or larger.

 

 

Please note: JH Motorsports does not recommend using EBC brake pads with our 2-piece lightweight rotors. Customer have reported and we have found EBC pads leave excessive pad deposits that can cause brake pulsation. Many EBC pads have a break in coating that reacts with the zinc plating used on our rotors

 

 

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.



This product fits the following vehicles:
Make Model Chassis Engine
Audi S4 B5 (1997-2002) 2.7t V6 30v
Audi A4 B6 (2002-2005) all
Audi A4 B7 (2005.5-2009) all
Audi S4 B6 (2003-2005) 4.2l V8 40v
Audi S4 B7 (2005.5-2009) 4.2l V8 40v
Audi A6 C5 (1998-2004) 2.7t V6 30v
Audi A6 C5 (1998-2004) 2.8l V6 30v
Audi A6 C5 (1998-2004) 3.0l V6 30v
Audi A6 C5 (1998-2004) 3.0l V6 30v
Audi allroad C5 (2001-2005) 2.7t V6 30v
Audi allroad C5 (2001-2005) 4.2l V8 40v
Reviews
Write Your Own Review
You're reviewing: Front Rotors (pair) JHM 350mm for Cayenne Caliper on B5 S4, C5 A6-allroad, B6-B7 A4-S4
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)