Select Vehicle From Dropdown

Intake Manifold Flap Linkage Arms (034Motorsport) for B7-RS4 4.2L V8 FSI

SKU: 034-108-Z005
$240.00
Details
Details
This is a brand new product from 034Motorsport that they have designed to finally fix a common point of failure on the B7-RS4 4.2L FSI V8. 034Motorsport's Intake Manifold Lever Arms are designed to replace the faulty and prone to breaking plastic flap arms.

As these cars get older, these weak plastic arms become brittle due to heat and age. We have had customers break them while they're removing their intake manifold for a carbon clean or installing our JHM B7-RS4 Intake Manifold Spacers through no real fault of their own.

If your arms haven't broken yet but you are getting ready to do a Carbon Clean and/or install our JHM Intake Manifold Spacers, consider replacing these arms at the same time to prevent yourself from performing the same labor a few thousand miles later. You can find our Intake Manifold Spacers in the same section as these Flap Arms (Engine and Performance).

For reference, here is a picture from our Intake Manifold Spacer Installation pointing out the location of the stock arms:

Click to enlarge picture
Audi Intake Manifold Flap Linkage Arms, B7/RS4

INSTALLATION INSTRUCTIONS

Installation instructions for these flap arms can be downloaded here: 034Motorsport B7-RS4 Intake Manifold Flap Linkage Arms Installation Instructions.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.


This product fits the following vehicles:
Make Model Chassis Engine
Audi RS4 B7 (2006-2009) 4.2l V8 32v FSI
Reviews
Customer Reviews (2)
Great product from 034! JHM instructions were excellent! Having helpful clear step by step instructions is what made me actually buy this. They were spot on and made install a breeze. Thanks for taking the time to make these! Review by Pablo (Posted on 9/11/2015)
Hi what will be the cost of shipping to uk for this item. Regards Pawel. Review by pawel (Posted on 2/24/2013)
Write Your Own Review
You're reviewing: Intake Manifold Flap Linkage Arms (034Motorsport) for B7-RS4 4.2L V8 FSI
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)