Select Vehicle From Dropdown

Sealing Flange, Rear or Billet Aluminum Rear Main Seal Upgrade (iABED) FOR VW-AUDI TSI 2.0t 462-103-171F

SKU: IAB-06H103171F
$129.99

Details
Details

Do you own a 2.0T TSI powered VW or Audi? Do you have a engine stumble or misfire, check engine light or mysterious oil leaks in the driveway? There's a good chance your rear main seal and PCV valve are failing. Don’t replace it with another part from the dealer that is known to fail. iABED Industries has developed an upgraded solution to permanently fix your rear main seal. The most common cause of rear main seal failure is a faulty PCV valve. The TSI engine is known to have PCV valve failures, which will cause an excess of crankcase pressure. This is more pressure than the rear main seal can handle. PCV issues can surface with multiple symptoms or virtually none at all.

The factory stamped unit uses a flimsy and very thin rubber surface to seal around the crankshaft. The crank is constantly spinning inside this seal too so over time as heat cycles are put through the engine, the rubber will expand and contract and become brittle, especially when it is constantly saturated with oil. iABED's replacement solution uses a patented billet machined plate that is bored to a larger diameter so that a Viton rubber seal can be used. The Viton seal is more heat resistant, fluid resistant, and more than twice as thick.

 

Kit includes:

iABED – 06H Billet Rear Crankshaft Seal

(1) Spring Loaded rear main seal

(8) M6 × 1.0 × 20mm SS Socket Cap Screws

A888.X Billet rear crankshaft seal housing.

 

Applications include: Application list includes all EA888 engines ranging in North America from the MK5 GTI to MK7 GTI

Volkswagen Beetle 2012-Present

Volkswagen CC 2009-2012

Volkswagen CC 2013-Current

Volkswagen EOS

Volkswagen GTI MK5 2008-2009

Volkswagen GTI MK6 2010-2014

Volkswagen GTI/Golf R MK7 2015-Present

Volkswagen Jetta MK5 2009-2010

Volkswagen Jetta MK6 2011-Present

Volkswagen Passat B6

Volkswagen Sportswagen 2009

Volkswagen Sportswagen 2010-2014

Volkswagen Tiguan 2009-2011

Volkswagen Tiguan 2012-Current

Audi A3 8P 2009-2013

Audi A4 B8 2008-2012

Audi A5 B8 2008-2012

Audi A4 B8.5 2013-Present

Audi A4 B8.5 2013-Present 2.0 Turbo (Valve Lift)

Porsche Macan 2014+ 2.0T Base Model



This product fits the following vehicles:
Make Model Chassis Engine
all all all all
Reviews
Write Your Own Review
You're reviewing: Sealing Flange, Rear or Billet Aluminum Rear Main Seal Upgrade (iABED) FOR VW-AUDI TSI 2.0t 462-103-171F
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!