Select Vehicle From Dropdown

MOTOR MOUNT, TRACK/STREET DENSITY LINE, B8/B8.5 AUDI A4/S4/A5/S5/Q5/SQ5 3.0TFSI, 3.2FSI, AND 2.0 TFSI

SKU: 034-509-0050-SD
$216.00
Details
Details

034Motorsport's Density Line Mounts are the new standard in comfort and performance. Our mounts are redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. Density Line Mounts are void-free and fluid-free, eliminating the slop and the possibility of leakage and collapse associated with the factory mounts. The mount bodies are made from high quality cast aluminum using OEM production techniques and employ emulators to replicate the electronics of the factory engine mounts for plug-and-play installation. This ensures MIL-free operation for cars equipped with active engine mounts.

Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to the complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance and comfort.

Features:

  • Manufactured from 50 Durometer (Street Density for 3.0TFSI and 3.2FSI, Track Density for 2.0TFSI) Rubber with Void-Free Construction
  • Built-In Emulator with Plug-In Connector for Vehicles Equipped with Factory Active Mounts
  • Reduced Drivetrain Slop
  • Decreased Engine Movement Under Load
  • More Direct Power Transfer
  • Improved Shifting Feel
  • Complete Drop-In Replacement of Factory Engine Mounts


Note: This mount has two different applications that is based on engine size (Track for 4-cyl and Street for 6-cyl). Please see the Fitment Guide tab below for application information.

We recommend installing our popular Transmission Mount Insert along with these motor mounts to minimize unwanted drivetrain movement, with a slight increase of NVH.

Sold Individually (One Vehicle Requires 2 Mounts)

 

Replaces:

 



    • 8R0198381B / 8R0 198 381B

    • 8R0199381C / 8R0 199 381C

    • 8R0199381AK / 8R0 199 381AK

    • 8R0199381G / 8R0 199 381G

    • 8R0199381AL / 8R0 199 381AL

    • 8R0199381AD / 8R0 199 381AD

    • 8R0199381AE / 8R0 199 381AE

    • 8R0198381Q / 8R0 198 381Q

    • 8R0198381D / 8R0 198 381D

    • 8R0198381C / 8R0 198 381C

    • 8R0198381B / 8R0 198 381B


 

Installation Instructions:



 

    • Please Note: We highly recommend having these mounts installed by an experienced mechanic. The installation process is the same as the factory mount remove and replace procedure. Our installation guide is meant to supplement the factory procedure.



Warranty:



    • 1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.)



034Motorsport Density Line B8 Audi A4/S4/A5/S5/Q5/SQ5 Engine Mount vs. Factory Motor Mount Comparison

 

High-Durometer Rubber vs. Polyurethane:

 

Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.

 

Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation.

 

Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance and comfort.



This product fits the following vehicles:
Make Model Chassis Engine
Audi A4 B8-B8.5 (2009-2016) all
Audi A5 B8-B8.5 (2008-2016) all
Audi allroad B8-B8.5 (2013-2016) 2.0t TFSI
Audi Q5 B8 (2009-Present) all
Audi S4 B8-B8.5 (2010-2016) 3.0t V6 24v SC
Audi S5 B8-B8.5 (2008-2017) 3.0t V6 24v SC
Audi SQ5 B8 (2014-Present) 3.0t V6 24v SC
Audi A6 C7 (2012-Present) 3.0t V6 24v SC
Audi A7 C7 (2012-Present) 3.0t V6 24v SC
Reviews
Write Your Own Review
You're reviewing: MOTOR MOUNT, TRACK/STREET DENSITY LINE, B8/B8.5 AUDI A4/S4/A5/S5/Q5/SQ5 3.0TFSI, 3.2FSI, AND 2.0 TFSI
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)
JHM Supercharger Kit for B8-S5 w/ 4.2L FSI V8, Stage 1 JHM Supercharger Kit for B8-S5 w/ 4.2L FSI V8, Stage 1
1 Review(s)

Select options & add to cart to view final price
From: $5,995.00

To: $7,140.00

JHM R Series Lightweight Flywheel (Chrome-Moly Forged) and Clutch Combo for B7-RS4 JHM R Series Lightweight Flywheel (Chrome-Moly Forged) and Clutch Combo for B7-RS4

Select options & add to cart to view final price
From: $1,474.95

To: $1,604.95