Select Vehicle From Dropdown

Motor Mount Pair, Street Density Line (034Motorsport) for B8 S5-RS5 4.2L FSI V8

SKU: 034-509-5010-SD
Introducing the new 034Motorsport B8 Chassis Density Line Motor Mounts!!!

JH Motorsports is pleased to offer 034Motorsport's new line of Street Density engine mounts for the B8 S5 and RS5 with the 4.2L FSI V8.

034Motorsport's Density Line Mounts are the new standard in comfort and performance. Their mounts are redesigned with performance in mind. Manufactured from high-durometer rubber for increased performance and durability, these mount offer improved driving dynamics and shifting feel without sacrificing comfort. 034Motorsport Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts.

Click to enlarge picture

034Motorsport Street Density Engine Mounts are manufactured from 65 durometer rubber, which is a significant upgrade from the 45 durometer rubber used in stock B8 Audi S5-RS5 mounts. Since the mounts are also void-free and solid-filled, the resulting mount is substantially stiffer than stock, without introducing any additional noise, vibration, or harshness into the cabin. The mount bodies are made from high-quality, cast aluminum using OEM production techniques.

The result is greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop. This is all accomplished without any noticeable increase in noise, vibration, or harshness (NVH) inside of the cabin. The solid rubber, void-free and fluid-free design eliminates the possibility of leakage and collapse, which is a very common issue with factory mounts. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts. They were tested thoroughly at 034Motorsport and here at JHM before release.

034Motorsport Street Density Engine Mounts utilize emulators to replicate the electronics of the factory engine mounts for plug-and-play installation. This ensures check engine/malfunction indicator light (CEL, MIL) free operation for cars equipped with active engine mounts.

Click to enlarge picture
Audi Motor Mount Pair, Street Density Line, B8 S5/RS5

Click to enlarge picture
Audi Motor Mount, Street Density Line (034Motorsport)

Click to enlarge picture
Audi Motor Mount, Street Density Line (034Motorsport)

Click to enlarge picture
Audi Motor Mount, Street Density Line (034Motorsport)

- Manufactured from 65 Durometer (Street Density) Rubber with Void-Free Construction
- Built-In Emulator with Plug-In Connector for Vehicles Equipped with Factory Active Mounts
- Reduced Drivetrain Slop
- Decreased Engine Movement Under Load
- More Direct Power Transfer
- Improved Shifting Feel
- Complete Drop-In Replacement of Factory Engine Mounts

- This pair of motor mounts features one mount with spacers pre-installed into the mounting points of the aluminum casting. This motor mount installs on the passenger side of your S5 or RS5.
- Installation Instructions can be found HERE. NOTE: This installation was performed on a B8-S4 with the 3.0T FSI V6. The installation procedure will be different on the V8 S5 and RS5 but this guide will still be helpful.

- 2008 - 2012 Audi S5 (B8) with 4.2L FSI V8
- 2012 - Present Audi RS5 (B8) with 4.2L FSI V8

This part replaces OEM Part Number: 8R0198381F or 8R0 198 381 F.

Warranty: 034Motorsport and JHM will provide a 1 Year Limited Replacement Warranty on these motor mounts. If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.

This product fits the following vehicles:
Make Model Chassis Engine
Audi RS5 B8-B8.5 (2011-2015) 4.2l V8 32v FSI
Audi S5 B8-B8.5 (2008-2017) 4.2l V8 32v FSI
Write Your Own Review
You're reviewing: Motor Mount Pair, Street Density Line (034Motorsport) for B8 S5-RS5 4.2L FSI V8
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More:

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)