Select Vehicle From Dropdown

DYNAMIC+ CAMBER MOUNT PAIR (034Motorsport), MKVII VOLKSWAGEN GOLF/GTI/R & 8V/8S AUDI A3/S3/RS3, TT/TTS/TTRS (MQB)

SKU: 034-601-1013
$345.00
Details
Details

MORE CAMBER, MORE GRIP


034Motorsport's Dynamic+ Camber Mounts are engineered to significantly improve handling performance for MkVII Volkswagen Golf/GTI/Golf R & 8V/8S Audi A3/S3/RS3, TT/TTS/TTRS models. Designed as a true drop-in upgrade, the Dynamic+ Camber Mount Pair provides an additional 1.4 degrees of negative camber at each of the front wheels to improve both turn in and cornering grip. Most importantly, Dynamic+ Camber Mounts provide a fixed camber increase without the cost, noise, and complexity of adjustable camber plates.

Dynamic+ Camber Mounts are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, and precise steering response. Equally well-suited for the street and track, Dynamic+ Camber Mounts deliver a perfect balance of performance, durability, and comfort.

DYNAMIC+ CAMBER MOUNT BENEFITS


  • Revamped Suspension Geometry for Performance Driving
  • Additional 1.4 Degrees of Negative Camber at Each Front Wheel (Compared to Factory Strut Mounts)
  • Significantly Enhanced Grip When Cornering
  • Improved Steering Feel & Handling Response
  • Reduced Strut Mount Deflection to Maintain Proper Strut Alignment Under Cornering Load
  • Significantly Reduced NVH (Noise, Vibration, Harshness) Increase Compared to Spherical Camber Plates
  • Billet Aluminum Construction with Replaceable Density Line Rubber Inner Pucks
  • Learn More

Dynamic+ Camber Mounts are machined from 6061-T6 Aluminum and feature 75 Durometer Density Line Rubber center pucks to minimize strut shaft deflection, while simultaneously preventing unwanted noise, vibration, or harshness (NVH) from being transmitted into the cabin. The Dynamic+ Camber Mount Pair is fully rebuildable, and includes new high-grade strut mount bolts for installation.

These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Dynamic+ Camber Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.

Dynamic+ Camber Mounts were tested extensively on the street and at the track with multiple 034Motorsport Development Vehicles before release to ensure that they deliver excellent performance and durability.

FEATURES & FITMENT

Features:

  • Complete Drop-In Replacements for Factory Strut Mounts
  • CNC-Machined from 6061-T6 Aluminum with Clear Anodized Finish
  • Proprietary 75 Durometer Rubber Inner Pucks
  • Durable, Rebuildable Design
  • Sold in Pairs - New High-Grade Strut Mount Bolts Included

Fitment:

  • 2015 - Present Audi A3 / S3 / RS3 (8V)
  • 2014 - Present Audi TT / TTS / TTRS (8S)
  • 2015 - Present Volkswagen Golf / GTI / R (MkVII)

INSTALLATION & WARRANTY

Installation Guide:

Replaces:

  • 5Q0 412 331D  5Q0412331D

Warranty:

  • 1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.)


This product fits the following vehicles:
Make Model Chassis Engine
Audi A3 8V (2015-Present) all
Volkswagen Golf MK VII (2015-Present) all
Audi S3 8V (2015-Present) 2.0t TFSI
Audi TT 8S (2016-Present) all
Audi TTS 8S (2016-Present) all
Volkswagen Golf Alltrack MK VII (2015-Present) 1.8t TSI
Volkswagen GTI MK VII (2015-Present) 2.0t TSI
Volkswagen Golf R MK VII (2015-Present) 2.0t TSI
Reviews
Write Your Own Review
You're reviewing: DYNAMIC+ CAMBER MOUNT PAIR (034Motorsport), MKVII VOLKSWAGEN GOLF/GTI/R & 8V/8S AUDI A3/S3/RS3, TT/TTS/TTRS (MQB)
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!