Select Vehicle From Dropdown

DOGBONE MOUNT PAIR, STREET DENSITY (034Motorsport), MKVII VOLKSWAGEN GOLF/GTI/GOLF R, 8V AUDI A3/S3/RS3, & MKIII AUDI TT/TTS/TTRS (MQB)

SKU: 034-509-1034
$76.00

Details
Details

Product Description:

034Motorsport's Street Density Dogbone Mount pair for MkVII Volkswagen and 8V/8S Audi models sets the new standard in performance mount solutions. Designed with performance in mind and manufactured from high-durometer rubber for increased performance and durability, the Street Density Dogbone Mount Pair is a complete performance replacement for the factory rubber dogbone mounts.

The Density Line Dogbone Mount Pair is manufactured from 65 durometer rubber - as opposed to the factory part's 55 durometer - and features a steel thread insert in the upper mount for increased resistance to stripping threads. This kit includes a new OEM dogbone mount bolt.

This upgrade is compatible with our full line of MQB drivetrain upgrades, and offers decreased drivetrain movement, crisper shifting, and reduced wheel hop, with minimal noticeable increase in noise, vibration, or harshness (NVH) inside of the cabin. (Please Note: NVH changes may be more noticeable in vehicles equipped with DSG or Tiptronic transmissions, and/or if your factory engine/transmission mounts are worn or failed. We recommend giving the mounts at least 250 miles to break-in after installation.)

High-Durometer Rubber vs. Polyurethane:

Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.

Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for control arm bushings that apply a shear force to the bushing during articulation.

Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance and comfort.

Features:

  • Complete Drop-In Replacement of Factory Mounts
  • Compatible with 034Motorsport's Version 1 MQB Lower Dogbone Mount Insert, Upper Insert, and Spherical Dogbone
  • Manufactured from 65 Durometer Rubber
  • Upgraded Steel Thread Insert in Upper Mount Replacing Factory Aluminum Which is Prone to Stripping
  • Reduced Drivetrain Movement
  • Decreased Engine Movement Under Load
  • More Direct Power Transfer
  • Improved Shifting Feel
  • Sold as a Pair

What Is Included:

  • Lower MQB Dogbone Mount Puck with Upgraded 65 Durometer Rubber
  • Upper MQB Dogbone Mount Puck with Upgraded 65 Durometer Rubber and Upgraded Steel Threads to Prevent Stripping
  • VAG-N91201001 OEM MQB Dogbone Mount Puck Bolt

Installation:

  • Installation of these mounts requires removal of the front subrame and the use of a press to remove and replace the dogbone mounts. For this reason, we recommend taking your vehicle to a reputable Audi/Volkswagen specialist for installation.


This product fits the following vehicles:
Make Model Chassis Engine
Audi A3 8V (2015-Present) all
Volkswagen Golf MK VII (2015-Present) all
Audi S3 8V (2015-Present) 2.0t TFSI
Audi TT 8S (2016-Present) all
Audi TTS 8S (2016-Present) all
Volkswagen Golf Alltrack MK VII (2015-Present) 1.8t TSI
Volkswagen GTI MK VII (2015-Present) 2.0t TSI
Volkswagen Golf R MK VII (2015-Present) 2.0t TSI
Reviews
Write Your Own Review
You're reviewing: DOGBONE MOUNT PAIR, STREET DENSITY (034Motorsport), MKVII VOLKSWAGEN GOLF/GTI/GOLF R, 8V AUDI A3/S3/RS3, & MKIII AUDI TT/TTS/TTRS (MQB)
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)