Select Vehicle From Dropdown

Dogbone Mount, Billet (034) MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI/Rabbit & 8J/8P Audi TT/A3/S3 2.0T FSI, 2.0 TSI, TDI, 2.5L, 3.2L VR6 24V

SKU: 034-509-1016
$245.00

Details
Details

We're proud to announce the availability of the Motorsport Billet Dogbone Mount for the MkV/MkVI Volkswagen & 8J/8P Audi TT/A3/S3!


034Motorsport's Motorsport Dogbone Mount is the new standard in performance and durability. This dogbone mount was designed with performance in mind, and is manufactured in-house from billet aluminum. Unlike other products on the market that use a polyurethane bushing, our mount features a genuine Aurora Spherical Bearing to maintain proper articulation and offer some vibration dampening. The Motorsport Dogbone Mount is machined and assembled in-house, and designed to eliminate the slop associated with the factory mount.


The result is a locked-down drivetrain, solid shifting, and virtually no wheel hop. The Motorsport Dogbone Mount will cause some increase in noise, vibration, and harshness (NVH) inside of the cabin. This mount is a completely re-engineered performance solution, not just inserts for use with the factory mount.


This upgrade was extensively tested on the street and track in various 034Motorsport product development vehicles before release.


Features:



  • Manufactured from T6-6061 Billet Aluminum

  • Genuine Aurora Spherical Bearing

  • Greatly Reduced Drivetrain Slop

  • Greatly Reduced Engine Movement Under Load

  • More Direct Power Transfer

  • Improved Shifting Feel & Accuracy

  • Complete Drop-In Replacement of Factory Dogbone Mount


Fitment:



  • 2006 - 2013 Audi A3/S3 (8P)


    • All Engines/Transmissions


  • 2006 - 2013 Audi TT/TTS (8J)


    • All Engines/Transmissions Except 3.2L VR6


  • 2005 - 2009 Volkswagen Eos / GLI / GTI / Jetta / R32 / Rabbit (MkV)


    • All Engines/Transmissions


  • 2006 - 2010 Volkswagen CC / Passat (B6)


    • All Engines/Transmissions


  • 2010 - 2013 Volkswagen Eos / GLI / Golf / GTI / Jetta / R20 (MkVI)


    • All Engines/Transmissions



Installation Instructions:


Warranty:



  • 1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.)


Please Note:


We recommend pairing this dogbone mount arm with our Density Line Dogbone Mount Pair for the ultimate reduction in drivetrain slop.


Alternatively, this mount can be paired with our Early (2005-2008.5) Billet Aluminum Dogbone Mount Insert or our Late (2009+) Billet Aluminum Dogbone Mount Insert.



This product fits the following vehicles:
Make Model Chassis Engine
Audi A3 8P (2006-2013) all
Volkswagen Golf MK V (2006-2009) all
Volkswagen Golf MK VI (2010-2014) all
Volkswagen R MK VI (2012-2013) 2.0t FSI
Volkswagen R32 MK V (2008) 3.2l VR6 24v
Volkswagen GTI MK V (2006-2009) all
Volkswagen GTI MK VI (2010-2014) all
Volkswagen Jetta MK V (2005-2010) all
Volkswagen Jetta MK VI (2011-Present) 2.0t TDI
Volkswagen Jetta MK VI (2011-Present) 2.0l
Volkswagen Jetta MK VI (2011-Present) 2.0t TSI
Volkswagen Jetta MK VI (2011-Present) 2.5l
Volkswagen Rabbit MK V (2006-2009) all
Audi S3 8P (2006-2012) 2.0t FSI
Audi TT 8J (2008-2015) 2.0t FSI
Audi TT 8J (2008-2015) 2.0t TFSI
Audi TT 8J (2008-2015) 2.0t TFSI
Audi TTS 8J (2009-2015) all
Reviews
Write Your Own Review
You're reviewing: Dogbone Mount, Billet (034) MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI/Rabbit & 8J/8P Audi TT/A3/S3 2.0T FSI, 2.0 TSI, TDI, 2.5L, 3.2L VR6 24V
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!