MOTOR MOUNT, STREET DENSITY, B5, B6, B7, AND C5 AUDI MODELS
NOTE: These are not for B6-B7 S4 V8s, that is a different part due to being shorter and is also available on our site. STREET DENSITY Mounts are solid rubber mounts with a 50 durometer about 10% stiffer than stock, this means they still ride smooth and quiet but provide a marked improvement in drivetrain dampening over stock mounts. Livable street performance with serious sport intentions. Note, since there are no voids or air pockets in these mounts, even though the rubber is only 10% stiffer, the resulting reduction in drivetrain movement is actually 25% stiffer.
NOTE: THIS IS NOT AN OE MOUNT, OR AN RS4 MOUNT, AND ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications.
034 has tested these mounts on our own B5 1.8t quattro for over 10k road miles and 6 track days, upon recent removal they still looked like new. JH Motorsports has also tested these mounts on several B5 S4s (both race and street density) with excellent results and a more rigid drivetrain.
Mounts will fit all B5 and B6 chassis 4 and 6-cylinder cars including Passat, A4/S4, A6 and many other applications, feel free to contact us for clarification.
Choose stiffness below, price PER mount, one car will need 2 mounts. B5 A4 install instructions -->HERE
NOTE: These mounts sometimes have cosmetic blemishes in the steel casings which occur in transit from 034Motorsport's manufacturer to their location. The rubber is so deeply embedded in the steel casing during the manufacturing process that this does not affect durability or performance of the mount.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
Make | Model | Chassis | Engine |
---|---|---|---|
Audi | S4 | B5 (1997-2002) | 2.7t V6 30v |
Audi | A4 | B5 (1996-2001) | all |
Audi | A4 | B6 (2002-2005) | all |
Audi | allroad | C5 (2001-2005) | 2.7t V6 30v |
Audi | A4 | B7 (2005.5-2009) | all |
Audi | RS4 | B5 (1999-2001) | 2.7t V6 30v |
Audi | A6 | C5 (1998-2004) | 2.7t V6 30v |
Volkswagen | Passat | B5 (1998-2005) | all |
- Bought to replace my failed factory motor mounts. Street density was a great choice and has produced no noticeable vibrations (compared to failed stock units). The 034 mounts are a hair taller and were not collapsed (making them almost half an inch taller than the outgoing mounts), which actually had the affect of improving my shift linkage alignment. It had been difficult to get into 1st and 2nd and times, and the new mounts greatly improved this problem which i did not expect. (Posted on 10/10/2016)
- bought as an upgrade 10%stiffer. well worth it!!!!! no noticeable vibrations but drive train feels a lot stiffer already. my next upgrade is 10% stiffer trans. mounts. (Posted on 5/31/2010)
- I bought one motor mount to replace a leaking on my car, without thinking it would make much difference. I was wrong. I felt a noticable difference in the was power was applied, almost like throttle response was sharpened. I liked it enough that I replaced the 2nd motor mount as well as a tranny mount. Now my drivetrain is locked down on the front half, shifting is more accurate, and I'm considering the polyurethane diff bushings. I would recommended this as an upgrade, and say it's an absolute must if replacing mounts on a high mileage car that probably has two bad mounts anyway. (Posted on 12/2/2008)
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov