- HD Valve Spring and Ti Retainer Set, Heavy Duty, High Rate, Performance for B6-B7 S4
HD Valve Spring and Ti Retainer Set, Heavy Duty, High Rate, Performance for B6-B7 S4
Head Gasket Set-w/ Valve Stem Seals (JHM) for B6-B7 S4 4.2L$250.00Add to Cart | Wishlist
When rebuilding heads on the B6-B7 S4 4.2L V8, we replace all of the springs standard for several reasons. We have seen many heads and engines damaged as a result of the weak and failure-prone Intake Valve Springs on these motors. The Springs are replaced with a Heavy Duty High-Rate Valve Spring set featuring a single spring setup for the Intake Valve Springs, a dual-spring setup for the Exhaust Valve Springs, and Titanium Spring Retainers. The Heavy Duty, High-Rate Springs and Titanium Spring Retainers allow for high-RPM operation of this motor by reducing the weight of the Valve, Spring, and Retainer combo. Reducing the weight of the combo reduces the amount of inertia required to propel the valves and this allows for a more stable and longer lasting valvetrain. Just the long list of advantages above was enough to convince us to run these parts in all of our JHM Rebuilt Heads. Since these upgraded spring kits cost about the same as OEM springs ONLY, upgrading to these Heavy Duty, lightweight, and more durable components was a no-brainer.
Click to enlarge picture
Click to enlarge picture
Click to enlarge picture
NOTE: This picture also shows our brand new, JHM Heavy Duty Coated Intake and Exhaust Valves which are included in our Rebuilt Cylinder Heads or available for sale separately. Our Heavy Duty High-Rate Valve Spring and Performance Titanium Retainer Set Includes the Following:
- 24x High-Rate Intake Valve Springs
- 16x High-Rate Exhaust Valve Dual Spring Pairs
- 16x Dual Spring Spacers
- 40x Titanium Retainers
For shipping quotes, please sign in or create an account then put the items you want in your shopping cart and proceed to checkout.
|Audi||S4||B6 (2003-2005)||4.2l V8 40v|
|Audi||S4||B7 (2005.5-2009)||4.2l V8 40v|
By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system. Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.
As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).
Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov
Sale Price $885.55