Select Vehicle From Dropdown

Subframe Bushing Kit, Rear (034Motorsport) Billet Aluminum for B6-B7 A4-S4-RS4

SKU: 034-601-0011
We are proud to offer 034Motorsport's latest Billet Aluminum Rear Subframe Bushing Kit for the B6-B7 Audi A4-S4-RS4! The factory rear subframe bushings are designed for comfort and manufactured using a rubber damping medium. This allows for subframe shifting and unwanted movement under load. This movement results in suspension and drivetrain slop that can be observed when pushing the car to its limits on the track.

034Motorsport's billet aluminum subframe mounts are designed as a direct replacement for the factory rubber subframe mounts and lock down the rear subframe. Installing these solid aluminum bushings will sacrifice the ride quality by causing additional noise and vibration transfer from the rear suspension and differential into the cabin.

These bushings have been thoroughly tested by 034Motorsport and independent Audi enthusiasts before release.

- T6-6061 Billet Aluminum Construction
- CNC-Machined In-House
- Engineered to Eliminate Movement/Slop in the Rear Subframe
- Improves Handling and Road Feel
- Will Cause Additional NVH Transfer Inside Cabin
- Straightforward Installation

What's Included:
- 034Motorsport Billet Aluminum Subframe Mount Set (Set of 4 Pairs, 8x total pieces)
- New Factory Replacement Subframe Bolts (Set of 4)

- 2002 - 2005 Audi A4 (B6)
- 2003 - 2005 Audi S4 (B6)
- 2005.5 - 2008 Audi A4 (B7)
- 2005.5 - 2008 Audi S4 (B7)
- 2006 - 2008 Audi RS4 (B7)

Replaces OEM part numbers 8E0505145AR and 8E0505145AP or 8E0 505 145 AR and 8E0 505 145 AP.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.

This product fits the following vehicles:
Make Model Chassis Engine
Audi S4 B7 (2005.5-2009) 4.2l V8 40v
Audi RS4 B7 (2006-2009) 4.2l V8 32v FSI
Audi S4 B6 (2003-2005) 4.2l V8 40v
Audi A4 B7 (2005.5-2009) all
Audi A4 B6 (2002-2005) all
Write Your Own Review
You're reviewing: Subframe Bushing Kit, Rear (034Motorsport) Billet Aluminum for B6-B7 A4-S4-RS4
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More:

Q and A

Product Questions

No questions yet. Be the first to ask the question!