• Stainless Steel Subframe Locking Collar Upgrade Kit,(034) MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI & 8P Audi A14
Select Vehicle From Dropdown

Stainless Steel Subframe Locking Collar Upgrade Kit,(034) MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI & 8P Audi A14 Zoom

Stainless Steel Subframe Locking Collar Upgrade Kit,(034) MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI & 8P Audi A14

Be the first to review this product

SKU: 034-601-0024
$225.00

Featured Products

Details
Details

034Motorsport is pleased to present the Stainless Steel Subframe Locking Collar Upgrade Kit for the MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI/R32/Passat/Rabbit & 8P Audi A3! Designed to center the subframe using precision-engineered stainless steel insert bushings and large-diameter bolts, this kit eliminates clunks caused by the subframe shifting, and increases chassis rigidity for improved handling performance.


This kit addresses the very common subframe clunk/pop/creak that presents itself when taking slow turns, entering driveways, coming to a stop, and starting from a standstill. Unlike the band-aid shims used in the factory Volkswagen Technical Service Bulletin (TSB V-401202 & Others) repair, these locking collars and upgraded bolts are a permanent, affordable solution to address the fundamental issue with the factory subframe design.


The upper and lower collars in our kit are specifically machineded to locate the subframe and bolts perfectly and ensure hassle-free installation. The supplied bolts feature factory-correct tips and thread engagement points to prevent thread stripping. Unlike other kits on the market that use softer alloys, our Mk5/Mk6 VW Golf/Jetta/GTI/GLI/R32/Passat/Rabbit, Audi A3, Subframe Locking Collars are made from stainless steel to prevent deformation and ensure a lifetime of performance.


Installation is very straightforward and can be performed in approximately one hour. No permanent modification to the subframe is required, and this upgrade completely reversible.



Features:


  • CNC-Machined Stainless Steel Locking Collars

  • Application-Specific Design for Both Upper & Lower Locking Collars

  • Engineered to Properly Locate (Center) Factory Front Subframe & Eliminate Shifting/Clunks

  • Includes New Large-Diameter Subframe Bolts to Prevent Loosening

  • Improves Chassis Rigidity & Handling Performance

  • Addresses Volkswagen Subframe Knocking Noise TSB V-401202 & Others Permanently!

  • Will Not Cause Additional NVH Transfer Inside Cabin

  • Easy, Straightforward Installation Takes Approximately 1 Hour!


What's Included:


  • 034Motorsport Stainless Steel Upper Subframe Locking Collars (Set of 6)

  • 034Motorsport Stainless Steel Lower Subframe Locking Collars (Set of 6)

  • High Strength Large-Diameter Factory Subframe Bolts (Set of 6)



Installation Instructions:




Fitment:



  • 2006 - 2014 Audi A3/S3 (8P)

  • 2005 - 2009 Volkswagen GLI / GTI / Jetta / R32 / Rabbit (MkV)

  • 2010 - 2014 Volkswagen GLI / Golf / GTI / Jetta (Aluminum Subframe Only) / Golf R (MkVI)

  • 2005 - 2010 Volkswagen Passat (B6)


Replaces:



  • WHT000431A

  • N91039802





This product fits the following vehicles:
Make Model Chassis Engine
Audi A3 8P (2006-2013) all
Volkswagen Golf MK V (2006-2009) all
Volkswagen Golf MK VI (2010-2014) all
Volkswagen R MK VI (2012-2013) 2.0t FSI
Volkswagen R32 MK V (2008) 3.2l VR6 24v
Volkswagen GTI MK V (2006-2009) all
Volkswagen GTI MK VI (2010-2014) all
Volkswagen Jetta MK V (2005-2010) all
Volkswagen Jetta MK V (2005-2010) all
Volkswagen Jetta MK VI (2011-Present) all
Volkswagen Rabbit MK V (2006-2009) all
Audi S3 8P (2006-2012) 2.0t FSI
Reviews
Write Your Own Review
You're reviewing: Stainless Steel Subframe Locking Collar Upgrade Kit,(034) MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI & 8P Audi A14
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
Company Info

Call Us:
209-968-0077

E-Mail Us:
sales@jhmotorsports.com

Find Us:
14150 S. Harlan Rd. Lathrop, CA 95330
General Infomation
© 2006 to present day JH Motorsports, Inc. All Rights Reserved.

JH Motorsports is not affiliated with or endorsed by Audi AG, Audi of America, Volkswagen AG, or Volkswagen of American or any other car company mentioned or whose logos are displayed in these web pages or our store. Audi®, Quattro®, Avant®, A4®, S4®, A6®, RS4®, RS6®, Allroad®, TT®, and Tiptronic® are trademarks of Audi AG. Volkswagen®, VW®, Golf®, Jetta®, Passat® and Beetle® are trademarks of Volkswagen AG. While we try to keep everything current, JH Motorsports is not responsible for errors in pricing on this web site. All prices are in US Dollars.

Some of these modifications and or parts are intended for off-road use only and may violate Federal or your State emissions standards. Also, end user assumes all risk with product performance and installation. JH Motorsports is not responsible for any bodily or mechanical harm, etc. as a result of use or misuse of any products.