- Snub Mount Bracket w snub, Street, (034Motorsport) for B6-B7 A4 with 1.8T and 2.0T FSI
Snub Mount Bracket w snub, Street, (034Motorsport) for B6-B7 A4 with 1.8T and 2.0T FSI
Front Caliper Bolt Kit, Porsche Cayenne (Brembo 6-piston)$59.95Add to Cart | Wishlist
Dipstick funnel (Vaico) for 01 and up B5-B6 A4 1.8t$12.48Add to Cart | Wishlist
We at JHM have been using these style brackets on all 2.7t B5-S4s and even our in house 2001.5 R and D B5-S4 for many years with great results. We are pleased to be selling these for the B6-B7 A4 with the 1.8T and 2.0T FSI now. This snub mount bracket is designed specifically for B6-B7 Audi A4s with the 1.8T and 2.0T FSI. It was originally designed around the Apikol Snub mount which we have sold for several years with great results. Most recently 034 started making their own snub mounts designed specifically for this cage to have an even better fit than the Apikol unit, (now available in this section for less than the Apikol units!). Unlike the stock snub bracket that allows an "air gap" around the mount, this bracket is a tight precision fit made of steel. So this bracket will take your upgraded Apikol or 034 snub mount to the next level. This bracket greatly reduces unwanted engine movement without excess vibration, features a black semi-gloss finish for OE look, has slotted holes to allow compliance in fit and adjust-ability for proper core support fitment to the frame rails. Fitment:
- B6 (2002-2005) Audi A4 1.8T
- B7 (2005-2008) Audi A4 2.0T FSI
034 or Apikol Polyurethane Snub Mount available separately in this section. Required for proper operation of this kit. We have not tested this bracket with any other brand-x replacement poly mount so we can't verify how tight or how loose a brand-x poly snub mount will fit. Do so at your own risk.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
|Audi||A4||B7 (2005.5-2009)||2.0t FSI|
By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system. Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.
As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).
Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov