Select Vehicle From Dropdown

MOTOR MOUNT, STREET DENSITY, B5, B6, B7, AND C5 AUDI MODELS

SKU: 034-509-0007-SD
$113.00
Details
Details
WHAT THEY ARE: A new line of rubber motor mounts made for 034 Motorsport by OE suppliers to 034 Motorsport specifications.

NOTE: These are not for B6-B7 S4 V8s, that is a different part due to being shorter and is also available on our site.

STREET DENSITY Mounts are solid rubber mounts with a 50 durometer about 10% stiffer than stock, this means they still ride smooth and quiet but provide a marked improvement in drivetrain dampening over stock mounts. Livable street performance with serious sport intentions. Note, since there are no voids or air pockets in these mounts, even though the rubber is only 10% stiffer, the resulting reduction in drivetrain movement is actually 25% stiffer.
NOTE: THIS IS NOT AN OE MOUNT, OR AN RS4 MOUNT, AND ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications.
034 has tested these mounts on our own B5 1.8t quattro for over 10k road miles and 6 track days, upon recent removal they still looked like new. JH Motorsports has also tested these mounts on several B5 S4s (both race and street density) with excellent results and a more rigid drivetrain.
Mounts will fit all B5 and B6 chassis 4 and 6-cylinder cars including Passat, A4/S4, A6 and many other applications, feel free to contact us for clarification.
Choose stiffness below, price PER mount, one car will need 2 mounts.

B5 A4 install instructions -->HERE

NOTE: These mounts sometimes have cosmetic blemishes in the steel casings which occur in transit from 034Motorsport's manufacturer to their location. The rubber is so deeply embedded in the steel casing during the manufacturing process that this does not affect durability or performance of the mount.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.


This product fits the following vehicles:
Make Model Chassis Engine
Audi S4 B5 (1997-2002) 2.7t V6 30v
Audi A4 B5 (1996-2001) all
Audi A4 B6 (2002-2005) all
Audi allroad C5 (2001-2005) 2.7t V6 30v
Audi A4 B7 (2005.5-2009) all
Audi RS4 B5 (1999-2001) 2.7t V6 30v
Audi A6 C5 (1998-2004) 2.7t V6 30v
Volkswagen Passat B5 (1998-2005) all
Reviews
Customer Reviews (3)
Bought to replace my failed factory motor mounts. Street density was a great choice and has produced no noticeable vibrations (compared to failed stock units). The 034 mounts are a hair taller and were not collapsed (making them almost half an inch taller than the outgoing mounts), which actually had the affect of improving my shift linkage alignment. It had been difficult to get into 1st and 2nd and times, and the new mounts greatly improved this problem which i did not expect. Review by Thomas (Posted on 10/10/2016)
bought as an upgrade 10%stiffer. well worth it!!!!! no noticeable vibrations but drive train feels a lot stiffer already. my next upgrade is 10% stiffer trans. mounts. Review by william (Posted on 5/31/2010)
I bought one motor mount to replace a leaking on my car, without thinking it would make much difference. I was wrong. I felt a noticable difference in the was power was applied, almost like throttle response was sharpened. I liked it enough that I replaced the 2nd motor mount as well as a tranny mount. Now my drivetrain is locked down on the front half, shifting is more accurate, and I'm considering the polyurethane diff bushings. I would recommended this as an upgrade, and say it's an absolute must if replacing mounts on a high mileage car that probably has two bad mounts anyway. Review by Sterling (Posted on 12/2/2008)
Write Your Own Review
You're reviewing: MOTOR MOUNT, STREET DENSITY, B5, B6, B7, AND C5 AUDI MODELS
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)