Select Vehicle From Dropdown

JHM R Series Flywheel Modification for JHM Version 1 2.7T LWFWs

SKU: JHM-V2LWFW-service

$75.00

Details
Details
**NOTE:** This product is for those who want to buy our new JHM R Series Clutch Kit only (pressure plate and clutch disc) and purchased our 2.7T Lightweight Flywheel prior to August 28th, 2014. If you are interested in purchasing the JHM Lightweight Flywheel and R Series Clutch Combo for the 2.7T, please go back one section and at that item to your cart.

UPGRADING YOUR CURRENT JHM LIGHTWEIGHT FLYWHEEL TO R SERIES CLUTCH KIT SPECIFICATIONS:

The design of the R Series pressure plate required an update to the current JHM Lightweight Flywheel for the 2.7T - the spring package of the R Series Clutch Disc is too heavy duty for the old flywheel design. If you already have a JHM Lightweight Flywheel from before August 28th, 2014 and want to upgrade your clutch setup to our new R Series Clutch, you can send your flywheel to JHM where we will perform the modification.

This modification includes performing the new Version 2 counter bore service on your flywheel which allows for the bolt hole mounting change. This service also includes the new reusable hardware kit for this V2 flywheel: 8 bolts and 8 thick washers. Once this service is performed, your flywheel will be at our new V2 specification and work with both our R Series clutches and RS4 pressure plate based clutches that came with our original V1 flywheel.

Make sure to go back one section and add the "R Series Clutch fpr N5-S4, C5 A6-allroad w 2.7T" to your cart. This modification service can only be purchased with a new JHM R Series Clutch Kit. It will include a free shipping label for sending your Version 1 (pre August 28th, 2014) Lightweight Flywheel to JHM where we will perform the modifications to your flywheel. Once the modification is complete, we will send back your newly modified flywheel with your brand new R Series Clutch Kit along with all the new bolts and hardware required for the installation of the Clutch and Lightweight Flywheel.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.


This product fits the following vehicles:
Make Model Chassis Engine
Audi allroad C5 (2001-2005) 2.7t V6 30v
Audi RS4 B5 (1999-2001) 2.7t V6 30v
Audi A6 C5 (1998-2004) 2.7t V6 30v
Audi S4 B5 (1997-2002) 2.7t V6 30v
Reviews
Write Your Own Review
You're reviewing: JHM R Series Flywheel Modification for JHM Version 1 2.7T LWFWs
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!