Select Vehicle From Dropdown

JHM Lightweight Crank Pulley for C6-S6 and D3-S8 FSI V10

SKU: JHM-C6D3V10CP

$350.00

Details
Details
PROUDLY MADE IN THE U.S.A

Introducing the JHM V10 FSI Lightweight Crank Pulley for the C6-S6 and D3-S8 with the V10 FSI.

These JHM Lightweight Crank Pulleys are perfectly counterbalanced just like stock for proper engine balancing while dropping nearly 9 lbs of rotating mass in the process!!! We also have the pulleys anodized in black so they more closely resemble the stock pulley and blend in better.

ABOUT THE PRODUCT:

Reducing the rotating mass of parts in or attached to the engine frees up horsepower. This modification is not a drastic horsepower increase but it is a key piece of the puzzle in unlocking the power of your naturally aspirated V10 FSI.

OEM Crank Pulley versus JHM Lightweight Crank Pulley Weights:
- OEM: 10.4 lbs
- JHM: 1.6 lbs
- Total Weight Savings: 8.8 lbs

Click to enlarge picture
Audi C6-S6 & D3-S8 Lightweight Crank Pulley by JHM

INSTALLATION NOTES:
- When doing this modification it is a great time to replace your drive or alternator belt. We sell these in this section of our store.
- It is important that you notice how tight your stock belt is prior to removal to gain access to the pulley. If you do not tighten it at least as tight as the stock belt was it will slip and squeal.
- One bolt hole in the OEM crank pulley has a dowel in it and must be removed and inserted into the JHM pulley. Then it can only go on one way.
- Torque all bolts to 20 ft lbs in a star pattern. We also recommend using loctite.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.


This product fits the following vehicles:
Make Model Chassis Engine
Audi S6 C6 (2006-2011) 5.2l V10 40v
Audi S8 D3 (2006-2010) 5.2l V10 40v
Reviews
Write Your Own Review
You're reviewing: JHM Lightweight Crank Pulley for C6-S6 and D3-S8 FSI V10
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)