Select Vehicle From Dropdown

Intake Manifold (Pierburg-OEM) for C6-S6 and D3-S8 w/ 5.2L FSI V10

SKU: PBG-07L133185M
This is a brand new, Pierburg (exact OEM MFG for Audi on this part, you pay less by cutting Audi out of their markup) Intake Manifold for the C6-S6 and D3-S6 with the 5.2L V10 FSI motor.

This intake manifold is a dual plenum or dual runner manifold that has two separate paths inside the manifold for air to enter into the combustion chamber. This design maximizes both low end torque and high end horsepower. The air is routed through these paths by plastic flaps attached to pivots that switch over based the RPM of the motor. These internal components often fail causing driveability issues and loss of power. If you are experiencing these symptoms, you might want to consider replacing your intake manifold with this brand new one.

OEM Part Number: 07L133185M or 07L 133 185 M. Pierburg PN 701116080 or 7.01116.08.0

NOTE: We offer V10 FSI Intake Spacers that help retain power as engine temperatures increase. When replacing your intake manifold, it would be a perfect time to install the JHM V10 FSI Intake Spacers as well. Please go back to the "Engine and Performance" section of our website to add these to your shopping cart.

NOTE: Here is a detailed JHM V10 Intake Spacer Installation DIY. These same steps can be used to for intake manifold replacement. CLICK HERE!!

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.

This product fits the following vehicles:
Make Model Chassis Engine
Audi S6 C6 (2006-2011) 5.2l V10 40v
Audi S8 D3 (2006-2010) 5.2l V10 40v
Write Your Own Review
You're reviewing: Intake Manifold (Pierburg-OEM) for C6-S6 and D3-S8 w/ 5.2L FSI V10
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More:

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)