- Intake - Carbon Fiber (APR-Carbonio) for B8-S4-S5 3.0T FSI, Stage 1
Intake - Carbon Fiber (APR-Carbonio) for B8-S4-S5 3.0T FSI, Stage 1
Carbonio's latest carbon fiber intake for the 3.0 TFSI engine is a ram air design that completely separates the intake filter from the engine bay. Building from years of experience on and off the race track, Carbonio's and APR's engineering teams have spent countless hours developing a true cold air and ram air carbon fiber design that can be recreated affordably for the street performance enthusiast.
For many years professional motorsport organizations have suffered great expense to properly tune the air intake delivery system for use in endurance and sprint races where every last horsepower and pound feet of torque can make the difference in position when crossing the finish line. Historically these designs have proven to be the most efficient and powerful although the most expensive to produce.
Aftermarket performance companies have attempted to capitalize on these designs however the cost restraints have typically resulted in compromise and deviation from the true engineering principles associated with motorsport accomplishment. Don't be fooled by catch phrases and tag lines alluding to a new intake technology or special design characteristic. You won't see any of these gimmicks installed on race cars at the Nurburgring.
Carbonio and APR have gone even further to maintain all oem specifications necessary to integrate cohesively with an otherwise stock engine to avoid raising eyebrows at the dealership. Flexibility was another characteristic of Carbonio's and APR's design whereas the new TFSI intake is also suitable for Stage 1 and Stage 2 modified engines all the way up to future supercharger upgrades.
Constructed of aerospace grade carbon fiber and designed to remove intake restriction, APR's Carbonio intake system provides smoother transitional airflow, increased air velocity, superior insulation of the incoming air to reduce intake air temperatures and a larger volume of available air to aid throttle response.
Power GainsClick to enlarge picture
Smooth and Direct Air Flow:
The OEM intake system vents some of the incoming air into the engine bay and takes several twists and turns before the air ever reaches the supercharger. The Carbono intake system simplifies the intake system by directing all incoming air directly at the filter.Modular Design:
The OEM intake system includes resonators in the hose connecting the air box to the throttle body designed to reduce supercharger whine. The APR Carbonio intake system in Stage I form replaces the factory air box and filter, and will deliver roughly 11 AWHP over stock. The Stage II back pipe when combined with the Stage I Air box will increase power further to around 15 AWHP and will slightly increase intake supercharger whine.
This is the Stage 1 Intake System. If you are interested in purchasing both Stages 1 and 2 for the Intake, add this item to your cart along with the Stage 2 Intake which can be found in this same section.
Benefits of the Carbonio CAI System include:
- Increased Horsepower and Torque
- Improved Throttle Response
- Improved Fuel Economy
- Removes OEM intake snorkel which can collapse under boost
- Enhanced Volumetric Efficiency of Engine
- Enhanced Sound of the Supercharger
- Installs in an Hour (does not require bumper or headlight removal)
- Maintains Clean Appearance by Retaining Factory Engine Covers
- Maintains All Factory Emissions Components
- Maintains the Thermostatically Controlled OEM Flap Valve Assembly from the Factory Air box
- Fits Both Manual and Automatic Transmissions
- Fully Compatible and Complimentary with APR Software, Exhaust, and Supercharger systems
- Modular Design Allows for Performance Gains in Stages and the Ability to Keep the Factory Intake Resonators
Off-road use ONLY: THIS PRODUCT IS FOR RACING COMPETITION ONLY AND IS NOT LEGAL FOR USE IN HIGHWAY OR STREET VEHICLES OR OTHER NON-RACING COMPETITION OFF-ROAD VEHICLES. BY PURCHASING THIS PRODUCT YOU ACKNOWLEDGE ITS INTENDED USE.
|Audi||S4||B8-B8.5 (2010-2016)||3.0t V6 24v SC|
|Audi||S5||B8-B8.5 (2008-2017)||3.0t V6 24v SC|
By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system. Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.
As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).
Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov