Select Vehicle From Dropdown

APR Silicone Boost Hose Kit, MQB 1.8T 2.0T TFSI

SKU: APR-MS100115
$199.99
Details
Details

PR is pleased to present the ultimate boost hose upgrade for MQB platform vehicles with the 1.8T and 2.0T engines!

Layout
EZ Flow

The APR Boost Hose System is a comprehensive, direct replacement upgrade, to the factory rubber hoses found in the charge piping system. The system includes a multitude of enhancements designed for maximum performance, longevity and insurance against power robbing boost leaks. The system is sold both as a complete kit, and individually, and is fully compatible with the OEM and upgraded APR Intercooler system, OEM throttle body and all OEM turbochargers.

Quick Facts

  • Direct OEM replacement
    Compatible with OEM/APR Intercooler, OEM Throttle body and all OEM turbochargers.
  • APR EZ-Flow design
    APR’s EZ-Flow stepped design provides maximum flow for maximum performance through a smooth, port matched transition from hose to connection surface.
  • Multi-ply silicone outer construction
    Pressure tested far beyond the engine’s capabilities, the system maintains performance under extreme conditions and increases both heat and burst resistance as well as mating surface adhesion compared to rubber.
  • Fluorosilicone interior surface
    A Fluorosilicone coating on the interior surface greatly resists oil and gasoline permeation providing an extra layer of protection against deterioration of the hoses.
  • Clampco T-bolt clamps
    Made from stainless steel, the Clampco T-bolt clamps replace the factory worm-gear clamps with thick, high quality and high strength T-bolt clamps designed to diminish the risk of boost leaks with increased connection strength and decreased hose slippage.
  • Additional quality control
    APR take quality seriously. Each hose is fully tested before it leaves our doors to ensure fitment and our EZ-Flow design is perfectly matched!

Full System

Hoses

Intercooler Hoses

Hoses

Throttle Body Hose

Hoses

Turbo Outlet Hose

Hoses
EZ Flow

APR’s Engineers took a multi-step approach to optimizing the hoses to minimize boost leaks, reduce turbulence and other performance degradations. Four-ply silicone was utilized as it provides the thickness and strength characteristics necessary to support boost levels far beyond the engine’s capabilities. A Fluorosilicone internal lining was added to ensure the hoses do not rapidly deteriorate over time when exposed to oil and gasoline from the PCV and EVAP systems. The included stainless-steel Clampco T-bolt clamps prevent the hoses from coming lose under heavy pressure and under high temperatures, silicone adheres to its mating surface, further minimizing leaks and hose slippage. APR’s EZ-Flow stepped designcreates a smooth airflow path, reducing turbulence over non-stepped designs. Finally, silicone provides better heat resistance over rubber, extending the life of the product and ultimately minimizing failure. The result is hose solution that directly replaces the factory rubber hoses and maintains performance under extreme conditions!



This product fits the following vehicles:
Make Model Chassis Engine
Audi A3 8V (2015-Present) all
Audi S3 8V (2015-Present) 2.0t TFSI
Audi TT 8S (2016-Present) 2.0t TFSI
Audi TTS 8S (2016-Present) 2.0t TFSI
Volkswagen Golf MK VII (2015-Present) all
Volkswagen Golf Alltrack MK VII (2015-Present) 1.8t TSI
Volkswagen Golf R MK VII (2015-Present) 2.0t TSI
Volkswagen GTI MK VII (2015-Present) 2.0t TSI
Reviews
Write Your Own Review
You're reviewing: APR Silicone Boost Hose Kit, MQB 1.8T 2.0T TFSI
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!