Select Vehicle From Dropdown

Front BBK (Big Brake Kit) JHM 382mm Porsche 19Z (Brembo 6-piston) for B9 A4-A5-S4-S5-Q5 - NO Calipers

SKU: JHM-BBK-1025x382x34-B9-NOcalipers

$1,349.00

* Required Fields

Details
Details

Introducing the 100% Bolt On, JHM 382mm Porsche Big Brake Kit for the B9 Chassis!!

 

JHMotorsports is pleased to introduce a low cost, 100% Bolt On, Front BBK (Big Brake kit) solution for your B9 A4-S4 A5-S5-Q5 that uses the popular Porsche Brembo 6-Piston Caliper, also commonly known as the 19Z!

 

ROTORS AND BRACKETS ARE PROUDLY DESIGNED AND BUILT IN THE USA

 

 


PICTURES (THESE ARE FROM B8 INSTALLS, B9 INSTALLS COMING SOON!):

 

Click to enlarge picture
Audi Front BBK (Big Brake Kit) 382mm Porsche (Brembo 6-piston) for B8 A4-A5-S4-S5 Click to enlarge picture
Audi Front BBK (Big Brake Kit) 382mm Porsche (Brembo 6-piston) for B8 A4-A5-S4-S5

 

DOES NOT INCLUDE CALIPERS: This page is for those who have or are sourcing their own calipers.  If you need calipers please see the product page in this section or search for "382mm BBK".  To locate your own used or from another source the PNs are 95535142261 for the Right caliper and 95535142161 for the Left Caliper.  Don't forget to flip the lines and bleeders so the pistons are staggered correctly for optimal braking.  

 

INCLUDES:
2x - JHM 2-piece Lightweight Slotted Front Rotors
2x - JHM Caliper Brackets with Mounting Hardware
1x - Set of OE Brake Pads
1x - OEM Brake Pad Sensor (Driver Side Only)
1x - Liter Pentosin DOT 4 Synthetic Brake Fluid

 

INSTALLATION: This is a COMPLETE 100% bolt on Big Brake Kit for the B9 Chassis. This kit requires ZERO modifications, cuts, grinds, splices, etc. making installation quick and simple. You even can reuse your factory brake lines. NOTE: The stock Dust Shields will need to be removed for proper clearance

 

Why the Porsche Cayenne caliper? With its 6-piston design and MASSIVE brake pads it is a strong performer. Also it bolts right up to your spindles using our JHM CNC'd Caliper Brackets. All you need is the included bolts, brake lines and JHM rotors and you have a 382mm Big Brake Kit.

 

Outer ring specs:
We worked closely with a race brake manufacturer that supplies many NASCAR racers and a couple major brake kit companies. Due to their expertise we chose to have them build us the outer rings to our specs to fit the B8 Chassis. 12 attachment points for durability and strength.

 

Click to enlarge picture
Audi B8 S4-S5 Brake Rotors (Rear) 2-piece Lightweight

 

Center hat specs:
We CNC machine the Aluminum center hats in house based on their recommended materials and thicknesses for durability. 12 attachment points for durability and strength. We also engrave JHM in them in 3 locations equal from each other, it looks clean and doesn't jump out or look tacky.

 

Click to enlarge picture
Audi Front BBK (Big Brake Kit) 382mm Porsche (Brembo 6-piston) for B8 A4-A5-S4-S5

 

Caliper Color Options: 

-Factory Porsche Red
-Black
-Yellow
-Blue

 

NOTE: These come from the factory RED in color with the Porsche logo and this option ships ASAP. Opting for a different color will remove the Porsche Logo and add an additional lead time of 1 to 3 weeks to strip and re-coat the calipers due to the fact they are only available in red from the factory.

 

 

NOTE: This brake upgrade only fits under 19" wheels or larger. It fits stock 19" B8 S5 wheels with NO wheel spacer and most other OEM and aftermarket wheels as well.

 

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.



This product fits the following vehicles:
Make Model Chassis Engine
Audi A4 B9 (2017-Present) all
Audi A5 B9 (2018-Present) all
Audi S4 B9 (2018-Present) all
Audi S5 B9 (2018-Present) all
Audi Q5 B9 (2018-Present) all
Audi SQ5 B9 (2018-Present) all
Reviews
Write Your Own Review
You're reviewing: Front BBK (Big Brake Kit) JHM 382mm Porsche 19Z (Brembo 6-piston) for B9 A4-A5-S4-S5-Q5 - NO Calipers
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)