Select Vehicle From Dropdown

Exhaust - Race Pipes (VERSION 2) - Stainless Steel, 2.5" (JHM) for B8 S4-S5 Q5 SQ5 3.0T

SKU: JHM-B830TRP

$599.95

Details
Details
ALL RACE PIPES HAVE BEEN UPDATED TO VERSION 2. THEY ARE REINFORCED TO PROTECT AGAINST DAMAGE DURING HIGH EGTs AND FLEX FROM EXHAUST SYSTEMS THAT DO NOT HAVE FLEX COUPLERS.

Introducing the JHM B8 S4-S5 3.0T FSI V6 Race-Pipes!!!

NOTE: Most of the industry refers to this style pipe as a "Test Pipe" we call it a race pipe to further clarify this product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles. By purchasing this product you acknowledge its intended use.

Following the release of our race pipes for the B8's 4.2L FSI Motor, we are pleased to announce our JHM Race Pipes for the B8 3.0T FSI V6. Based on our development of the 4.2L FSI pipes along with countless hours spent working with the 3.0T FSI, we have produced a high-performance race pipe for the 3.0T FSI that fits just like OEM.

Click to enlarge picture
Audi Exhaust/Race Pipes/Stainless Steel, 2.5, B8 S4/S5 3.0T

Click to enlarge picture
Audi Exhaust/Race Pipes/Stainless Steel, 2.5, B8 S4/S5 3.0T

WHY JHM RACE PIPES?
The OEM cat-pipes are extremely restrictive and limit the amount of power the 3.0T FSI V6 can produce. Our JHM 2.5 in race pipes are a must have item for any 3.0T FSI V6 owner looking to make serious power from their vehicle.

FITMENT: These race pipes fit ALL B8-S4s and S5s with the 3.0T FSI V6 motor, manual or automatic. They will install in your car just like the OEM pipes that they replace. We made several different revisions of these pipes to make sure that they installed just like the OEM-pipes, if not better.

We have also designed these cat-pipes to work with both stock and other "brand-x" aftermarket downpipes. So, our JHM 2.5 in Stainless Steel Race Pipes will work with both your stock downpipes AND your aftermarket downpipes.

NOTE: These pipes were designed on a Left Hand Drive vehicle. We have had some Right Hand Drive customers mention that they had to make a slight indentation in the pipe to clear the steering shaft and linkage. Please take this into consideration when ordering.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.


Notice:

Off-road use ONLY: THIS PRODUCT IS FOR RACING COMPETITION ONLY AND IS NOT LEGAL FOR USE IN HIGHWAY OR STREET VEHICLES OR OTHER NON-RACING COMPETITION OFF-ROAD VEHICLES. BY PURCHASING THIS PRODUCT YOU ACKNOWLEDGE ITS INTENDED USE.

This product fits the following vehicles:
Make Model Chassis Engine
Audi Q5 B8 (2009-Present) 3.0t V6 24v SC
Audi S5 B8-B8.5 (2008-2017) 3.0t V6 24v SC
Audi S4 B8-B8.5 (2010-2016) 3.0t V6 24v SC
Audi SQ5 B8 (2014-Present) 3.0t V6 24v SC
Reviews
Customer Reviews (3)
Products
I have a 2013 s4 and did a stage 2 with you’re “testpipes” and you’re huge heat exchanger along with the 187mm crank pulley. First off the products are first class . Top of the line. I can’t believe the power , sound and the quality..again. The s4 is now a beast. Thanks to you’re products a can say this s4 is one of the quickest and fastest in Los Angeles. Review by Racerx (Posted on 2/10/2021)
Excellent Mod
I was pretty scared to tackle these but after just a little bit of research, I was able to install these on my Quick Jacks within 4 hours. Fitment and quality is excellent and they mated up perfectly to my ECS tuning Resonated valved exhaust. Installing these is alot easier than people think. Remove covers, Remove X brace, remove transmission mount and secure the trans with a jack. Lower the subfram slightly and you'll be able to get to the stock cats without a problem. Have a ton of 1/4" extensions and a deep socket 12mm and you'll be straight. Review by Bruno (Posted on 12/14/2020)
I Love’em! Thanks Eli-IgnitionTube for that solid review via YouTube!
If it wasn’t for Eli via IgnitionTube I wouldn’t have found these!
I’ve gotta say that these are awesome! The acoustics of these babies indeed unleashed that growl from the belly of the beast, and not only that they’ve certainly alleviated a pretty substantial amount of heat from the engine bay. Thanks JHM, and another high five to Eli, fives stars JHM
Review by Doré (Posted on 9/30/2019)
Write Your Own Review
You're reviewing: Exhaust - Race Pipes (VERSION 2) - Stainless Steel, 2.5" (JHM) for B8 S4-S5 Q5 SQ5 3.0T
Off-road Use

By Purchasing any Off-Road use ONLY products from JH Motorsports, Inc. I acknowledge and understand the following disclosure. (This notice is located at the bottom of the page description of affected products on our website.)

Vehicle Code § 27156:
(b) No person shall operate or leave standing upon a highway a motor vehicle that is required to be equipped with a motor vehicle pollution control device under Part 5 (commencing with Section 43000) of Division 26 of the Health and Safety Code or any other certified motor vehicle pollution control device required by any other state law or any rule or regulation adopted pursuant to that law, or required to be equipped with a motor vehicle pollution control device pursuant to the National Emission Standards Act (42 U.S.C. Secs. 7521 to 7550, inclusive) and the standards and regulations adopted pursuant to that federal act, unless the motor vehicle is equipped with the required motor vehicle pollution control device that is correctly installed and in operating condition. No person shall disconnect, modify, or alter any such required device.
(c) No person shall install, sell, offer for sale, or advertise any device, apparatus, or mechanism intended for use with, or as a part of, a required motor vehicle pollution control device or system that alters or modifies the original design or performance of the motor vehicle pollution control device or system.

Health and Safety Code § 43000:
43001. The provisions of this part shall not apply to:
(a) Racing vehicles.

As the aforementioned code sections outline, it is against the law to operate or use a vehicle on public streets or highways with modified, altered, or disconnected motor vehicle pollution control devices. This may include but is not limited to, Evaporative Fuel Controls, Catalysts, DPF, PTOX, PCV Systems, Exhaust Gas Recirculation Systems, Oxygen Sensors, Thermostatic Air Cleaners, Air Intake Systems, Fuel Injectors, Regulators, Adjustable Cam Gears, ECU Programming, Mapping, or other Computer Modifications. Air Pumps, Air Injection, Timing, and any other Emission System Modification(s).

Purchaser acknowledges and certifies to JH Motorsports Inc., that Purchasers vehicle will only be used for racing applications or off road vehicle use only. Purchaser requests these modifications for the purpose of enhancing the vehicle for competitive Racing Applications and will not use this vehicle on public streets or highways. Purchaser agrees to indemnify JH Motorsports Inc., all employees, officers, owners, and subsidiaries for any civil or criminal liability arising out of use of Purchasers vehicle on public streets or highways as Purchaser has been duly notified of the laws and regulations regarding disconnecting, alteration, or modification of a vehicle’s pollution control devices. Purchaser understands and has been advised the driving of a vehicle on public streets or highways could result in criminal or civil penalties.

Prop 65

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov

Q and A

Product Questions

Sort by ASC
I see this fits an A7 but will this fit my C7 A6 with the 3.0T since they are the same chassis? Right hand drive.
0
Will these work with factory DP's?
0
do i have to get a tune if i install these test pipes ?
0
What exactly is included? What else needs to be purchased for install?
0
Does anyone know is jhm test pipes comes with gaskets and hardware
0
You may also be interested in the following product(s)