Select Vehicle From Dropdown

Driveshaft Spacer for 0A3 or 01E Manual Conversion-Swap for C5 A6 and S6 w 4.2l V8 and 5hp24 5-speed Tiptronic transmission

SKU: AS4-C5A6S6dsSpacer
This is needed to swap your C5 A6, C5 S6 with 4.2l V8 and 5hp24 5-speed tiptronic transmission to a 01E B5-C5 2.7t transmission or the more modern 0A3 B6-B7 S4 transmission!
NOTE: To install a 0A3 B6-B7 S4 transmission you will need the JHM speedometer converter, JHM trans mount brackets, JHM CV Shaft spacer this product, parts from the list below and a software solution, contact us for details.

Spacer allows for use of your factory installed driveshaft. The driveshaft spacer is CNC'd out of 6061 aluminium and machined to aircraft tolerances. Balance tested to over 10,000 rpm's.

Includes a set of OEM bolts and washers to mount to the transmission!!

Check out this product page for more info and other parts needed for the 0A3 swap -> HERE>

This product fits the following vehicles:
Make Model Chassis Engine
Audi S6 C5 (2002-2003) 4.2l V8 40v
Audi A6 C5 (1998-2004) 4.2l V8 40v

Product Questions

No questions yet. Be the first to ask the question!
You may also be interested in the following product(s)